Lightolier specifications Lytecaster Recessed Downlighting 1104F2632ES, Page  of, Frame-InKit

	Lytecaster® Recessed Downlighting  1104F2632ES
Page  of 1	6 3/4" Aperture 0® 1 Lt 26/32W Quad/Triple Tube Compact Fluorescent
		IC Frame-In Kit

7

3

75/16"

OVERALL

WIDTH

13" MIN. 24" MAX.

103/4"

OVERALL

LENGTH

4

2

6

5

7 1/2"

1 OVERALL HEIGHT

7"

APERATURE

Ceiling Opening 7" diameter

Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit			Reflector Trims — See Individual Reflector Trim Specification Sheets
					Open Downlight			Enclosed	Wall
	Voltage	Lamp	Anodized	Anodized	Satin		Basic
						Baffles		Diffusers	Washer
			Reflector	Cone	Cone		White
	120V	26/32W	1143*	1112	1108	1105	1171*	1121	1185**
1104F2632ES		Quad or	1144*	1112NM	1108NM	1105BNM	1170M1	1124	1186
		Triple	1144CD*	1113	1110	1105NM		1126** (26W Only)	1186WH
1104F2632ESN
		Tube		1113BK	1110NM	1105WH		1134	1135**
				1113BKNM		1176		1177SH**	1135WH**
				1113CD		1176WH		1178SH
				1113CDNM				1190** (26W Only)
				1113NM
				1113WH

Features

1.Housing: .032” (#20 ga.) UL listed for direct contact with thermal insulation. Allows installation in ceilings up to 2" thick. Can be removed for access to junction box, ballast and ceiling plenum. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation

in ceiling.

2.Mounting Frame: .048” (#18 ga.) galvanized steel. Locks into position along length of mounting bars with locking spring and bendable slot. (3) slots 90° apart simplify alignment.

3.Junction Box: 2" X 4" X 3 1/2" (22 cu. in.) .032" (#22 ga.) galvanized steel. UL listed for branch circuit wiring supplying connected luminaires. Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.

4.Mounting Bars: .059” (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can accommodate 9" O.C. joist spacing after a slight field modification (see Instruction Sheet). Features integral self-tapping phillips screws for secure attachment to wood or metal construction. Attaches to T-bar ceilings without the need of accessories.

5.Socket Housing: Trim retaining spring secures trim to any height on housing wall.

6.Socket: (4 Pin, GX24q-3) base, molded thermo-plastic. Pre-wired with #18 AWG leads to junction box.

7.Ballast: Electronic 120V, end of life protected, FCC class “B” consumer limits, class “A” sound rating. Energy Star® qualified.

Electrical

Input Watts: 27 *Recommend Triple Tube Lamp for Optimal Performance.

Amps: .47 **Use Triple Tube Lamp Only.

Ballast Factor: 1.0

Power Factor: .98

Electrical (cont.)

Max THD %: 10

Min Start Temp: 0˚F/ -18˚C

Options & Accessories

AirSeal® Kit: LAS56† (Optional)

Note: Use only if factory installed tape or knockouts are removed from verti- cal adjustment slots in housing wall.

Labels

†UL (Type IC Suitable for Damp Locations)

Complies with Air Leakage Requirements stated in the Model Energy Code, California Title 24 Code and the Washington State Energy Code.

Romex® is a registered trademark of General Cable Industries Inc.

US and Foreign Patents Pending.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2006 Genlyte Group LLC • C0906