| ProSpec™ Flangeless Track Lighting 26800 |
Page of 4 | Recessed Flangeless Track |
2 | 1 5/8" |
| 1 |
|
|
|
| ||
| [41.4] |
|
|
|
1 11/16" |
|
| 5/8" | 48" |
|
| [15.9] | ||
[42.9] |
|
|
| [1219.2] |
|
|
|
| 96" |
|
|
|
| [2438.4] |
3 | 1" |
| 11/16 | 144" |
[25.7] |
| [17.5] | ||
|
| [3657.6] | ||
|
|
| 1/2" |
|
|
|
| [14.0] |
|
|
|
|
| 47 5/8" |
|
|
| 5/8" | [1209.7] |
|
|
| 95 5/8" | |
|
|
| [15.4] | |
| 9 |
| [2428.9] | |
|
|
| ||
| 11 | 7 |
| 143 5/8" |
|
|
| [3648.1] | |
|
|
|
| |
|
|
|
| 13/64" |
|
|
|
| [5.2] |
|
|
|
| Feed |
|
|
|
| 8 |
Catalog No. |
|
|
| 10 |
|
|
|
|
13/64" [5.2]
4
Finishes | Plain Track |
|
| Feed Track |
|
|
|
| 4' | 8' | 12' | 4' | 8' | 12' |
|
|
|
|
|
|
|
|
|
Matte White | 26804WH | 26808WH | 26812WH | 26801WH | 26802WH | 26813WH |
|
Matte Black | 26804BK | 26808BK | 26812BK | 26801BK | 26802BK | 26813BK |
|
|
|
|
|
|
|
|
|
Features
1.Track:
2.Conductors: “U” shaped copper conductor, increases contact surface area minimizes contact resistance provides reliable positive connection.
3.Insulated liner: .040" wall, high temperature extruded thermoplastic.
4.Dead End Cap: molded thermoplastic.
5.Feed Track: Electrical module
6.Plain Track: May be field cut.
7.Hanger Clip: Item No. 26090. Heavy duty steel. For mounting track by cable.
8.
9.Metal Spline: included with Plain and Feed Track. Locks track together.
10.Wire Cover: molded thermoplastic, included with all track connectors.
11.Mounting Strap: included with Plain and Feed Track.
12.Reversible Wing Brackets: Accommodates 1/2" or 5/8" Gypsum Board.
Mechanical
Track units plug together and lock securely to prevent accidental separation. Track units may be field cut. ProSpec™ track fixtures can be attached at any point along the track. Flush adapters can be inserted in any orientation to access
the circuit desired. Lever identifies which circuit is being used and is easily observed from floor.
Electrical
(2)circuits. Each circuit is 120V, 60Hz, 20 AMP compatible. Each circuit has dedicated neutral for maximum control flexibility. Track units are continuously grounded throughout. Electrical conductors are concealed in an insulated liner in the track. Intended for wiring to branch circuit building wire with ground, in accordance with National and local codes.
Mounting
Recessed Flangeless Track may be mounted in dry ceiling systems only. The track may be installed in insulated ceilings. There are three methods of mounting. (see page 2)
1.Direct Mounting: field drill holes in the track and mount directly to a structural member above track.
2.Mounting Straps: (included with plain and feed track) slide into the side channel of the track and may be fastened to the building structure.
3.Cable Mounting: using the hanger clip (sold separately) which mounts on top of the track. Ceiling cable or wire is fastened to the hanger clip and building structure.
Finish
All painted finishes are baked enamel.
Labels
UL; I.B.E.W.; US and Foreign Patents Pending
Job Information | Type: |
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • 1105