Lytecaster Recessed Downlighting302MRX, Labels

Lytecaster Recessed Downlighting 302MRX

Page 1 of 1

3 3/4" (95mm) Aperture Low Voltage MR16 12V Standard Frame-In-Kit (Non-IC)

14"(356mm) MIN.

25"(635mm) MAX.

7"(175mm)

9-1/2"

(244mm)

5-3/4"

146mm

12-1/4" 311mm

Complete fixture consists of Reflector Trim & Frame-In Kit. Select each separately

Power Pack	Cut Out	Reflector Trim

302MRX (120V)	3-3/4" (95mm)	Accepts most 3-3/4" (95mm) 300 serie trims; see Reflector
		Trim specification sheets.

Features

1.Mounting Frame: 20ga. galvanized steel. Four slots are positioned 90º apart to simplify alignment.

2.Mounting Bars: (4) 18 ga. galvanized steel. 13" (330mm) long bars extend to 27" (686mm), rotatable and lockable, integral T-bar tabs. Spike detail eliminates the need of additional nailing.

3.Mounting Bars Locking Clip: (1) locks mounting bars in place.

4.Snap-on Socket Cup: 22ga. galvanized steel. Easy snap-on to housing.

5.Socket: Porcelain body ; Two-pin (GX5.3 base) Pre-wired with 18 ga. Teflon 250º leads to junction box.

6.Transformer: 50VA Magnetic, 120 volt primary, nominal 12 volt secondary, class "H".

7.Thermal Protector: Meets CSA/UL requirements. Insulation, if used, must be kept 3" (76mm) away from luminaire sides and junction box.

8.Junction Box: 4" (102mm) x 3" (76mm) x 2" (51mm) 18 ga. galvanized steel . CSA/UL certified for maximum of 8 No. 12 ga. 90º C through branch circuit conductors. Integral cable clamp permit attachment of non metallic Loomex without need of additional connectors. Pry-out knock-outs accept BX cable. Easy access from both sides with snap-on covers.

Accessories

Mounting Bars Extenders: 1964 20" (508mm) long. Set of 2 Mounting Bar Locking Clips: 0098

To lock mounting bars in place after installation. Set of 12.

Labels

Damp or Wet location rated depending on trim used.

Job Information	Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier specifications Lytecaster Recessed Downlighting302MRX, Page 1 of, Power Pack, Type

Models: 302MRX