Lightolier manual Page 4 of, Advent Lytespan 1 and 2 Circuit Track6101, Job Information, Type

Advent Lytespan® 1 and 2 Circuit Track  6101

Page 4 of 4

Track Mounting, Power Feed Systems and Mounting Patterns

Variable Angle Connector

The Variable Angle Connector is pre-wired and polarized. It contains a nut with a thread 1/2"-14 to accept a 3/8" (trade sized) electrical connector. Flexes in all directions.

6153NWH Matte White

6153NBK Matte Black

6153NAL Matte Black

11-3/4"

0-90

Wall

Inside

Corner

Wall

Outside

Corner

Ceiling to Wall

Floating Invisible Feed

Can be mounted anywhere along the track at a maximum distance of 4' from edge of track extrusion. Accepts conduit or cable with 3/8" or 1/2" electrical connector (by others). Can be used with Live End, "L", "T", "X", and In-Line and Variable Angle connectors. Use Track Mounting Clips to mount the track.

26082 Zinc Plated

	3/8"
	Electrical
Wire Cover	Fitting
	(by others)
	Clamp Set
	Track

Direct Feed into Connectors

The Live End, "L", "T", "X", In-line, and Variable Angle Connectors contain a nut with a 1/2"-14 thread to accept a 3/8" or 1/2" (trade size) electrical connector, 3/8" connector recommended. Does not require a separate power feed kit.

3/8" Connector
(by Others)
Cast Plug	Track Unit
Live End	Locknut 1/2"-12
	Live End Cover

1/2"-14 Thread, Integral with Live End

Track Unit

Live End

3/8" or 1/2" Connector, 3/8" recommended (by Others)

Power Extension Connector

Replaces Dead End Cover at end of track to permit power continuity around structural obstacles to another track section.

Accepts same power feed-in kits as Live End.

6146NWH Matte White

6146NBK Matte Black 6146NAL Matte Aluminum

Over Beam or Through Beam

		Beam
3/8"		Jump
Connector
Track		Track
Power Extension		Power Extension
Connector	Wall	Connector

Through Wall or Column
3/8" Connector	Jump (Conduit)
Track	Track
Power Extension	Power Extension
Connector	Connector
Wall

"L" Connector

The "L" connector is polarized and pre-wired. It may be rotated for right angle or left angle turn. KO permits direct feed with electrical connector.

6150NWH Matte White

6150NBK Matte Black 6150NAL Matte Aluminum

3-11/32"

"T" Connector

The "T" connector is not pre-wired or polarized. Used to make "T" pattern with track. 12 ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector.

6151NWH Matte White

6151NBK Matte Black 6151NAL Matte Aluminum

5-1/2"

"X" Connector

The "X" connector is not pre-wired or polarized. Used to make "X" pattern with track. 12ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector.

6152NWH Matte White

6152NBK Matte Black 6152NAL Matte Aluminum

5-1/2"

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group •F0808

Lightolier is a Philips group brand