![NSTRUCTIONSHE~ NO.](/images/new-backgrounds/40618/406183x1.webp)
NSTRUCTIONSHE~ NO.
INSTALLATION OF THE SLOPED CEILING ADAPTER (Continued)
1S:7920
W384 Page2 of 2
b.Attach
(4)PHILLIPS HEAD POINTED SHEET METAL SCREWS. See Fig. 6 and instruction 3.
B.For Modular
a.Secure MODULAR
C.For Recessed H.I.D. Downlights without
a.Detach Lightshield (cone,
b.Secure SLOPED CEILING ADAPTER to the HOUSING SUPPORT by tightening, from inside of fixture, the
(4)PHILLIPS HEAD POINTED SHEET METAL SCREWS as shown in Fig. 8.
NOTE For EL8 fixture series bend(4) TABS 90° outward from NOTCHES to center HOUSING SUPPORT in SLOPED CEILING ADAPTER. Then secure with (4) WASHERS though NOTCHES shown in Fig. 9.
D. For Calculite and Recessed H.I.D. Downlights with flangless Sheet Metal Trim Ring:
a.Detach SHEET METAL TRIM RING from fixture (see instruction sheet packed with fixture).
b.Attach SHEET METAL TRIM RING to SLOPED CEILING ADAPTER by tightening (4) PHILLIPS HEAD POINTED SHEET METAL SCREWS. See Fig. 10 and instruction 3,
;.AfLer complete installation, replace white molded ring (if any) and Lightshield (cone,
FIG. 6
!!
SHEET METAL SCREWS (4)
PHILLIPS HEAO POINTEOTlltE/ Ii’
~
| (FLANGE OOWN) | |
SLIJPE’OCEILING ADAPTER | ||
/ |
|
|
FIG. 7 |
| MOOULAR |
PHILLIPSHEAO |
|
|
POINTED SHEET |
|
|
METAL SCREWS (4) |
|
|
WASHER |
|
|
|
| \ |
SLOPEOCEILING |
| WHITE MOLDEO RING |
ADAPTER |
| |
|
| |
FIG.8 |
|
|
H.I.O. HOUSING SUPPORT |
|
|
\ |
|
|
\ | ,, | II |
BRACKET (4) RIVETED
TO SLOPED CEILING
AOAPTER
OR REFLECTOR
PHILLIPS HEAD POINTEO
SHEET METAL SCREWS (4)
SLOPEO CEILING
AOAPTER
FIG. 9
H.I.O. HOUSING
PHILLIPS HEAD POINTED ‘“ | k |
| |
SHEET METAL SCREWS (4) |
|