Lightolier 8608 manual Lytespan Accent Lighting System, Page of, LyteJacks 75W Remote Transformer

	Lytespan® Accent Lighting System 8608
Page of 1	LyteJacks 75W Remote Transformer

Catalog No.	Mounting	Accessories (Order Separately)
		Catalog No.	Description
8608	Recess in accessible ceiling. Access above ceiling required	1950	18” Mounting Bars (Set of 2)
	Insulation must be kept 3” away from transformer sides	1951	27” Mounting Bars (Set of 2)
	and wiring compartment; and must not be placed above unit	1956	T-Bar Clips (Set of 4)
	as to entrap heat.

Features

1.Transformer: Magnetic type, 75W, 120V or 277V input, 12V output.

2.Steel Splice Box: Contains knockouts for conduit.

3.Divided Wiring Compartment: Contains taps for 120V or 277V supply and secondary wires from transformer.

4.Thermal Protector

5.Mounting Bar: (See Accessories).

6.Steel Mounting Brackets: Used with mounting bars (order separately) for mounting onto ceiling runners.

7.T-Bar Clips

8.Ceiling Runner

Electrical

Low voltage magnetic transformer, 120V or 277V input, 12V output, powers any Point Power Jack. The transformer is limited to a total load of 75W or (2) Point Power Jacks, whichever is fulfilled first. Thermally protected. Type Non-IC. Requires min. 75°C supply wires. Use only dimmers specially rated for induc- tive loads (low voltage fixtures equipped with magnetic transformers) such as Lightolier Lytemode and Scenist systems and Lightolier dimmers carrying the suffix VA.

Labels

UL; I.B.E.W.

Patents

Products shown here are protected by applicable patents and patents pending.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2006 Genlyte Group LLC • B1106