
F | INSTRUCTION SHEET NO. | . |
|
INSTRUCTIONS FOR CONNECTING LYTEJACKS FIXTURES | IS:8672 | |
|
| |
TO 8600 SYSTEM POWER JACKS. | 0989 | Pagel of2 |
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE.
This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical
inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
NOTE: Use this Focal Jack with a 50 watt Power Jack.
1.Turn power off. Insert the top of the STEM (Fig. 1) fully into the POWER JACK RECEPTACLE. Verify engagement by exerting a LIGHT DOWNWARD pull. The STEM should not release from the POWER JACK.
2.To remove the fixture, grasp the STEM and FIRMLY pull DOWNWARD until STEM is disengaged from the SOCKET RECEPTACLE.
FIXTURES ARE DESIGNED FOR 360° HORIZONTAL ROTATION and 0° TO 90° VERTICAL ADJUSTMENT.
TYPICAL POWER JACK PQ
FIG. 1
SEE BACK FOR LAMPING