Lightolier C4T4GA-MHT4RS manual Glasslite Trim Kit + Spot Upper Reflector Frame-In Kit Lamp

Calculite® HID Adjustable Accent C4T4GA-MHT4RS

Page 1 of 2 4 1/2" Aperture, T4.5, Ceramic Metal Halide, Glasslite, Spot

Spot

Upper Reflector

Ceiling Cutout: 5 1/8” (130mm) Dia.

For Complete Fixture Order: Glasslite Trim Kit + Spot Upper Reflector (MHT4RS) + Frame-In Kit. Each Sold Separately.

Glasslite Trim Kit + Spot Upper Reflector	Frame-In Kit		Lamp
C4T4GA + MHT4RS (Spot Upper Reflector)	C4A20T4E1	Electronic 120V	20W T4.5	Ceramic MH
Etched glass, with matching flange.	C4A20T4E2	Electronic 277V	20W T4.5	Ceramic MH
	C4A39T4E1	Electronic 120V	39W T4.5	Ceramic MH
	C4A39T4E2	Electronic 277V	39W T4.5	Ceramic MH
	C4A70T4E1	Electronic 120V	70W T4.5	Ceramic MH
	C4A70T4E2	Electronic 277V	70W T4.5	Ceramic MH

Features

1.Spot Upper Reflector: Specular faceted aluminum; provides 12° beam. Interchangeable with 25° Narrow Flood (MHT4RNF) and 40° Flood (MHT4RF); see spec sheets C4T4GA-MHT4RNF and C4T4GA-MHT4RF.

2.Glasslite Trim Kit: One piece borosilicate etched glass.

3.Trim Kit Adjustment Mechanism: Provides 35° vertical tilt, 360° horizontal rotation; lockable. Patented EZ-Aim Helical Drive System provides fast and accurate hot aiming with Philips screwdriver.

4.Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket. Snaps onto yoke for secure attachment without tools; unitized construction assures proper alignment of lamp to optics for consistent optical performance.

5.Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover for top re-lamping.

6.Frame Vertical Adjustment Mechanism: Accommodates mounting to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be pre-set prior to installation. Final adjustment can be made from below from inside fixture.

7.Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping bars extend to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without accessories.

8.Retention Springs: Rust resistant springs secure trim for quick, tool-less installation.

9.Ballast / Cover Assembly: Accessible from below and removable without tools for inspection and ballast replacement .

10.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG, 90° C through branch circuit conductors. Allows inspection from below.

11.Accessory Holder: Sold separately catalog # CAH4; die-formed steel, matte black finish, slide-in installation. Accepts up to two 3 3/4" dia. media.

12.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical

Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high

power factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies with FCC Part 18 non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”, -5°F minimum starting temperature, Type 1 Outdoor rating.

Ballast	ANSI Code	Voltage	Max. Amps	Input Watts
20W MH	M156	120/277	0.21/0.10	23
39W MH	M130	120/277	0.39/0.17	44
70W MH	M139	120/277	0.67/0.29	78

Options and Accessories

Chicago Plenum: Consult Factory

Labels

UL (Suitable for Wet Locations), CSA, I.B.E.W.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte Thomas Companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504