Lightolier manual Calculite Matrix Low Voltage Open Downlight C4X4MRD

	Calculite® Matrix Low Voltage Open Downlight  C4X4MRD
Page 1 of 1	4½" X 4½" Square Aperture (1) MR16 Low Voltage

8" 5 6 9 8 7 1 2 3 4 10

9.66"

8.16"

12"

9.66"

2"

Max. Ceiling

Thickness

Ceiling Cutout: 5 1/4" x 5 1/4" (130 mm x 130mm) Dia.

Ordering Information

Frame-In Kits		Reflector Trims	Finish/Flange	Lamp
C4 X4LVMU	Magnetic 120/277V	C4X4MRDCLW	Specular Clear/White	(1) 12V MR16 Type Lamp
C4X4LVE1	Electronic 120V	C4X4MRDCLP	Specular Clear/Polished	65W Max or IR 37W Max
C4X4LVE2	Electronic 277V	C4X4MRDCCLW	Comfort Clear/White
		C4X4MRDCCLP	Comfort Clear/Polished
		C4X4MRDCCDW	Comfort Clear Diffuse/White
		C4X4MRDCCDP	Comfort Clear Diffuse/Polished
		C4X4MRDWHW	White/White

Features

1.Reflector Trim: 55° physical and reflected cutoff. Available with integral flange painted white or polished to match inside of cone.

2.Lamp Holder: Unitized optics ensure alignment of lamp and aperture cone. Soft diffusion lens ships standard. Adjust trim kit vertically to accommodate up to 2" thick ceiling.

3.Socket: Ceramic body with mica cover, GX5.3 (MR-16) base.

4.Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.

5.Frame Vertical Adjustment Mechanism: Accommodates mounting to virtually any ceiling system using pre-installed mounting bars, or ½" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be pre-set prior to installation. Final adjustment can be made from below from inside the fixture.

6.Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping bars extend to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without accessories.

7.Retention Springs: Rust resistant springs secure trim for quick, tool-less installation.

8.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG, 90°C through branch circuit conductors. Allows inspection from below.

9.Thermal Protector: Meets NEC and UL requirements. Do not install insulation above nor within 3" (76mm) of any part of the luminaire.

10.Transformer: Replaceable from below. Magnetic: 120/277V 60 Hz. Dual-

voltage, core & coil. Electronic: 120V or 277V 50/60 Hz., regulated lamp voltage, HPF, EMI and circuit protections, thermal auto-reset, quiet operation.

Options and Accessories

Accepts two optical accessories

2" diameter color filters/specialty filters: ADF2/AF2

2" diameter louver: AL2HC

Labels

UL, cUL (Suitable for Damp Locations)

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • A0507