![Page 2 of 2](/images/new-backgrounds/40423/404233x1.webp)
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electric shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
INSTRUCTION SHEET NO.
IS: CA3FMR
A1104 |
| Page 2 of 2 |
INSTALLATION PROCEDURE FOR CALCULITE→ EVOLUTION:
CA3FMR SERIES FLANGELESS TRIM RING FOR FLANGELESS TRIMS
4. Apply plaster/compound to the ceiling (Fig 3). Starting at the outside of the ring circumference, evenly build up the plaster/compound around the entire RING LIP surface. It is also acceptable to carefully apply plaster/compound over the cardboard FLANGELESS TRIM RING PLASTER SHIELD if preferred. Plaster/compound should be applied so as to firmly secure FLANGELESS TRIM RING flush to ceiling.
5. Feather the plaster/compound out away from the RING until the transition is smooth and acceptable; multiple coats may be required.
6. Sand away surface blemishes. For best results, sand flat until the FLANGELESS TRIM RING plaster lip is visible.
7. If cardboard FLANGELESS TRIM RING PLASTER SHIELD is covered with plaster/compound, use a sharp blade to carefully cut around inside circumference of FLANGELESS TRIM RING and remove cardboard.
8.Paint as required, making sure to keep paint out of
Fig. 3 | PLASTER / COMPOUND |
PLASTER / COMPOUND | PLASTER SHIELD | |
APPLICATION TOOL |
|
|
|
|
|
Fig. 4 |
| FLANGELESS |
|
| TRIM RING LIP |
|
|
|
CEILING APPEARANCE
AFTER PLASTER / COMPOUND
HAS BEEN APPLIED AND FLANGELESS TRIM RING PLASTER SHIELD HAS BEEN REMOVED.
U.S. AND FOREIGN PATENTS PENDING
A
COMPANY
631 Airport Road, Fall River, MA 02720