Addressable Track Dimming ModuleLytespan® Track Lighting System CAM25OVA
Page 1 of 2
| 7 1/4" |
|
|
11 | (184.15) | 2 | 1 |
| 6 3/8" |
|
|
9/16" | (161.93) |
|
|
(14.51) |
|
|
|
1 7/16"
(36.51)
7 | 4 11/16" |
4 5
1 9/16"
| 9 | (119.06) | |
8 | 3 | ||
10 |
6
(39.69)
( ) Denotes Dimensions in MM
2 1/16"
(52.39)
REQUIRES LASER REMOTE CONTROL FOR OPERATION
Ordering Information
Catalog No. | Finishes | Track Mounting | Luminaire Compatibility |
CAM250VAWH | Matte White | Compatible with Lytespan Basic | Should be "Compatible with |
CAM250VABK | Matte Black | Radius, & Advent Track Systems. | any Lytespan Line & Low Voltage |
|
| DO NOT USE with Extension Wands, | Incandescent luminaire, |
|
| Sloped Ceiling Adapter, All Monopoints, | 250W Max. DO NOT USE with Power Jack, |
|
| & Prospec Track | Metal Halide, Fluorescent, or Convenience Outlet Units |
|
|
|
|
Description
Individually addressable module that mounts anywhere along the track and accepts any Lytespan Line & Low Voltage Incandescent luminaire (see luminaire compatibility for exceptions) for the purpose of addressing a selected single luminaire for raising and lowering the light level (dimming) or switching On/Off, while powered by the same track. Programmable to store desired light levels of single luminaires or to group with two or more luminaires within the same system for the purpose of creating light scenes and effects (including kinetic lighting effects)
Features
1.Module Housing:
2.PCB: High temperature resistant programmable electronics with smart mod- ule microprocessor.
3.Basic Lytespan Track Strip: Die cast aluminum, with
4.Track Attachment Fitting:
5.Moveable Brass Contact: Extends for 2nd circuit in two circuit Lytespan track systems.
6.Attachment Lever: Impact resistant polycarbonate. For mechanical/electri- cal connection to track.
7.Locking Lever: Steel, safety locking lever locks and supports module in track.
8.IR & Laser Sensors: Sensor devices for receiving information from ATOM Remote Control.
9.Sensor Cover: Clear Polycarbonate, protects sensors from damage.
10.LED: Red indicator light, provides visual response to operation modes.
11.Top Cover Heat Sink: Die cast aluminum, for structural support and heat dissipation.
Electrical
Unit is polarized and continuously grounded throughout. 250W load capacity.
Options & Accessories
ATOM Track Master Module (CAMTM): Used on track to cycle Module scenes & to send out signals to multiple modules from a single location on the track.
ATOM Wall Remote Control (CAMWRC): Used to activate programmed
scenes from wall location.
Lightolier Controls COMPOSETM PLC
Recommended for each track circuit with an ATOM installation. Reduces unwanted electrical noise on track circuit.
Lightolier Controls COMPOSE Firewall, 4 & 8 circuit (CPLCFW4,
CPLCFW8): Used when multiple circuits are to be controlled.
Lightolier Controls COMPOSE Master Control Station (CP5ESPLC):
Ellipse Series 5, Scene Master
The ATOM System is compatible with all Lightolier Controls COMPOSE PLC system.
Job Information | Type: |
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • D0705