Lightolier CAMWRC Page 2 of, ATOM Addressable Track Module System, Atom Module Effects, Type

Addressable Track Wall Remote Control Lytespan® Track Lighting System CAMWRC

Page 2 of 2

ATOM Addressable Track Module System

Addressable Track Dimming Module

Will dim or switch power ON or OFF to a luminaire from a remote loca- tion. Module will function with incandescent line voltage and low voltage luminaires, 250W MAX. Module attaches anywhere along track. Accepts commands from Laser Remote Control and Wall Remote Control units. Can be combined with Track Master Module to create several different lighting effects.

See separate specification sheet for additional details before specifying this unit.

CAM250VAWH (Matte White)

CAM250VABK (Matte Black)

7 1/4"

1 9/16"

1 7/16"

2 1/16" 4 11/16"

Addressable Track Non-Dim On/Off Module

Will switch power ON or OFF to a luminaire from a remote location. Module will function with incandescent line voltage, incandescent low voltage, fluorescent and metal halide track luminaires, 250W MAX. Module attaches anywhere along track. Accepts commands from Laser Remote Control and Wall Remote Control units. Can be combined with Track Master Module to create several different lighting effects.

See separate specification sheet for additional details before specifying this unit.

CAM250NDWH (Matte White)

CAM250NDBK (Matte Black)

7 1/4"

1 9/16"

1 7/16"

2 1/16" 4 11/16"

Track Master Module

Sends control signals along the track to other modules from a single loca- tion on the track. Used to cycle scenes, create lighting effects, and dim, raise, or turn on or off the light levels on all modules on the track simulta- neously. Use one track master per track branch circuit. Accepts com- mands from Laser Remote Control and Wall Remote Control units.

See separate specification sheet for additional details before specifying this unit.

CAMTMWH (Matte White)

CAMTMBK (Matte Black)

7 1/4"

1 9/16"

1 7/16"

4 11/16"

Laser Remote Control

Used to program the system and change light levels from a remote loca- tion. Equipped with a laser and infrared (IR) transmitters. The visible laser signal, when pointed at a module, places the module in program mode. The laser signal accuracy allows a single unit to be selected easily when multi- ple modules are on the track. Once in program mode, the IR signal is used to program the desired functions. The remote will allow the user to set the light level, turn modules on or off, set and run multiple lighting scenes, set fade rates, set cycle times, and begin and end cycles. The remote operates the Dimming Module, Non-Dim On/Off Module, and Track Master Module.

See separate specification sheet for additional details before specifying this unit.

CAMLRC

2 1/16" 5/8"

3 1/4"

ATOM MODULE EFFECTS

Scene Setting: Lighting effects and light levels can be stored in each module for use at any time. Each group of stored settings is called a scene. Each module can store six programmable and on/off scenes.

Fading Effects: The time transition between scenes can be programmed into each module. Modules are pre-programmed with a 3-second fade rate between scenes that may be extended to 30 minutes or reduced to

1.5 seconds.

Cycling Effects: The modules will cycle through scenes with programmed fade and timed delays in a continuous loop or a single cycle.

This function requires a Track Master Module.

Addressing: Allows you to set and address individual modules to run several completely separate ATOM systems on the same Track.

Setting an address will also allow you to communicate with the Compose PLC line of controls.

For a detailed explanation of operation, please see the ATOM Operations Manual.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) • B0902