Lightolier CXS Series 2x2 dimensions Ordering Information, Specifications

CXS SERIES 2x2	CLEANGUARD CLASS 10,000 CLEAN ROOM
	RECESSED FLUORESCENT

PHOTOMETRY MODEL NO. CXS2GFSVI26U120SO

CXS2GFSVI26U120SO

		LER = FL - 56.0		IW - 53.7	BF - 0.87
		Comparative yearly lighting energy cost per 1000 lumens = $4.24
coefficients of utilization — zonal cavity method						(effective floor cavity reflectance 0.20)
	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
ratio	1	69	66	63	62	60	58	59	58	56
	3	57	51	46	48	44	41	46	43	40
	2	63	58	54	54	51	48	52	50	47
cavity	4	53	45	40	43	38	35	41	38	34
	5	48	41	35	38	34	30	37	33	30
room	6	45	37	31	35	30	27	34	30	26
	8	39	30	25	29	24	21	28	24	21
	7	42	33	28	32	27	24	31	27	23
	9	36	28	23	27	22	19	26	22	19
	10	34	26	21	25	20	17	24	20	17

ORDERING INFORMATION

Explanation of Catalog Number. Example: CXS2GFSVI26U120SOGLR

CX

S

2 VI

CLEANGUARD

WET

LOCATION

Class 10,000

or

100,000

Clean Room

STATIC

FIXTURE				LENS FRAME:			LAMP
WIDTH				FS= Flat steel frame		QUANTITY:
				RA=Regressed			2=2 Lamp
				aluminum frame			3=3 Lamp
				FA=Flat aluminum
				frame				LAMP/
					LENS/SHIELDING TYPE:			FIXTURE LENGTH:
					VI=(virgin acrylic) .125			2U=T8, 1-5/8" U Lamp
			CEILING TYPE:
					standard. For options			17=T8, 2' Lamp
	G= Grid (lay-in T bar)
					consult factory.			6U=6" U Lamp (T8)
	F=Flanged (overlap) Z spline
					Smooth side of			FT=Twin Tube T5
		and plaster frame
					lens towards room.			(Nominal 24")

Other dimming options. Consult factory.

VOLTAGE:				OPTIONS:
120 or 277			Add appropriate suffix
			to catalog no., ie: (GLR)
		BALLAST TYPE:
			<20THD <10THD
1-1	& 1-2 Lamp Elec. T8		SO*	HI*
1-3	Lamp Elec. T8		O3*	H3*
1-1	& 1-2 Lamp Elec. TT5 SB*			IB*
(40 Watt)				I3*
1-3	Lamp Elec. TT5		X3*
LOL T8 Dimming			PS*	-
LOL TT5 Dimming			PB*	-

*Instant Start Standard

OPTIONS/ACCESSORIES

PLASTER FRAME: Catalog Number PF24.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half width flanges are required between fixtures. Order Catalog Number:

S2FCTRIM (each joint).

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

ELECTRICAL/WIRING OPTIONS: Consult factory.

SPECIFICATIONS:

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side rails hemmed over and housing ends turned-in for safe handling.

FINISH: Chassis exterior–black baked polyester enamel. Cavity–white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. LENSES: VI (standard) extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .125" nominal thickness (similar to pattern 12).

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. LABELS: I.B.E.W./UL and ULc Listed.

We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

	TECHNICAL INFORMATION • (978) 657-7600
	631 AIRPORT ROAD, FALL RIVER, MA 02720 • (508) 679-8131
	C.F.I. DIVISION OF CANLYTE, INC.
	525 EDUCATION ROAD, CORNWALL, ONTARIO
A Genlyte Thomas Company
	CANADA K6H 6C7 • (613) 938-6221	PRINTED IN USA 3/02