Lightolier CXSW SERIES Page 2 of, Photometry, Ordering Information, Options & Accessories, Type

Section 6/Folio N40-16

Cleanguard Class 1,000/10,000 Clean Room CXSW SERIES

Page 2 of 2	Recessed Fluorescent, 2x4, for 15/16" to 1-1/2" wide face T-bar
	2, 3 or 4 Lamp, T8

Photometry Model No. CXS2WFAVI332120O3

G02021DATE: 01-30-02 CXS2WFAVI332120O3

3 F32/T8 TL841, EACH RATED 2850 LUMENS. FIXTURE WITH INVERTED VI LENS IN FS F

LER = FP - 73.2			IW - 108.7	BF - 0.88
Comparative yearly lighting energy cost per 1000 lumens = $3.28
coefficients of utilization — zonal cavity method
	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
	1	74	71	68	67	64	62	64	62	61
ratio	2	68	62	57	58	55	52	56	53	51
	3	62	55	49	51	47	44	50	46	43
cavity	4	56	48	43	46	41	37	44	40	37
	5	52	43	37	41	36	32	40	35	32
room	6	48	39	33	37	32	28	36	31	28
	7	45	35	30	34	29	25	33	28	25
	8	41	32	27	31	26	22	30	26	22
	9	39	30	24	29	24	20	28	23	20
	10	36	27	22	26	22	18	26	21	18

THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY VARY FROM LABORATORY PERFORMANCE.

Ordering Information

Explanation of Catalog Number. Example: CXS2WFAVI332120O3GLR

CX

Cleanguard

Clean Room:

Class 1,000,

10,000 or

100,000

Clean Room

S

Static

2		W		FA	VI				32
Fixture	Ceiling Type:			Lens Frame:		Lamp Quantity:			Lamp
Width	W = Grid 15/16"		FA = Flat				2=2 Lamp	Fixture Length:
		to 1-1/2" face		aluminum			3=3 Lamp		32=T8
		(lay in T-bar)		frame			4=4 Lamp	(Nominal 48")

Lens Shielding

Type:

VI (virgin acrylic) .125 standard. For options consult factory. Smooth side of

lens towards room.

Voltage:		Options:
120 or 277	Add appropriate
	suffix to catalog
		no, ie: (GLR)

Ballast Type:

<20THD <10THD

1 & 2 Lamp Elec. T8	SO*	HI*
2-2 Lamp Elec. T8	SO*	HI*
1-3 Lamp Elec. T8	O3*	H3*
1-4 Lamp Elec. T8	O4*	H4*
LOL Dimming T8	PS*	–

*Instant Start Standard

Other dimming options, consult factory.

Options & Accessories

Fusing: Internal fast-blow fusing. Suffix: GLR.

Internal slow-blow fusing. Suffix: GMF.

Electrical/Wiring Options: Consult factory.

Specifications

Materials: Chassis parts are die-formed code gauge cold rolled steel. Housing with side rails hemmed over and housing ends turned-in for safe handling. Finish: Chassis exterior–black baked polyester enamel. Cavity–white baked polyester enamel minimum 86% refelctance. Phosphate undercoating.

Lenses: VI (standard extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .125" nominal thickness (pattern 12) installed smooth side down.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. Copyright 2004 Lightolier