Lighting Systems EC1-4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energos Control System 1-Light T5 per 4' (121.92cm) (Nominal) Louver

Feature Specifications – Energos Control System (For standard Energos fixtures consult appropriate EG spec sheets)

Feature Specifications

Electrical

Dedicated low voltage (24 VDC) circuit controls the Energos Control Systems. The line voltage circuits control all the standard ballast functions including A/B switch- ing, Dimming and Emergency Battery Pack operations.

Occupancy Sensors:

Time delay is factory pre-set to 30 minutes.

Time delay can be field adjusted from 30 minutes to a minimum of 30 seconds.

Daylight hold-off is factory pre-set to 120 ft-candles (1291.67m-candles).

Daylight hold-off is field adjustable from 120 ft-candles (1291.67m-candles) down to 10 ft-candles (107.64m-candles).

Sensors are designed for a detection area (sensitivity diameter) of 16' (487.68cm) when suspended 10' (304.80cm) AFF. Lowering the sensor produces a smaller area of detection. See chart and diagram for additional information.

1. End Cap Sensor Mounting

2. Mid-mounted 8' (243.84cm)

 

Sensor Mounting

ECS occupancy sensors are available in two variations:

Mounted in the end cap.

The middle of an 8" (243.84cm) module.

The ECS system control-center is the Power Pack. The Power Pack, contained in each Master Module, interrupts the circuits when parameters dictate. The Power Pack can control up to 600 watts 120 VAC, and 1300 watts 277 VAC. A maximum of 10 sensors can be used on a single Power Pack. There is no limitation to the number of Power Packs that can be "daisy-chained" to a single ECS circuit.

Emergency battery packs can be used in conjunction with ECS for emergency egress lighting since all listed packs operate for a minimum of 90 minutes. EM Packs can be used as momentary lighting for emergency circuit for power transitions, and smaller packs are recommended for this purpose.

Coverage Diameter

16' 0" 14' 5" 12' 10" 11' 3"

Sensor Height AFF

7' 0"

8' 0"

9' 0"

10' 0"

Dimming ballasts can be used in conjunction with ECS. However, the control system will only perform ON or OFF operations and will not affect the level of dim- ming set by the dimming ballasts.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Serial Row Linking (SRL) provides multiple continuous row communication. For every run that SRL is required, order the appropriate SRL end set from page 2 of this Specification Sheet. Consult Energos Application Guide for more detailed definitions and examples.

Mountings

Cable suspension distances are on 48" (121.92cm) and 96" (243.84cm) centers, and consist of a 4 1/2" (11.43cm) diameter canopy finished white enamel. A 1/16" (0.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 12" (30.48cm) to 36" (91.44cm). Power feeds are 18 gauge silver braided cord with clear jacket.

Energos Occupancy Sensor

Coverage Zone Chart

Height of Sensor

Broadcast Diameter

Task Diameter

10' 0" (304.80cm)

 

16' 0" (487.68cm)

8' 0" (243.84cm)

9' 0" (274.32cm)

 

14' 5" (427.99cm)

7' 3" (214.12cm)

8' 0" (243.84cm)

 

12' 10" (391.16cm)

6' 5" (184.15cm)

7' 0" (213.36cm)

 

11' 3" (336.04cm)

5' 7" (154.18cm)

 

 

 

 

Job Information

 

Type:

 

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0808

Page 1
Image 1
Lightolier EC1-4 specifications Feature Specifications Electrical, Coverage Diameter, Mountings

EC1-4 specifications

The Lightolier EC1-4 is a versatile and efficient lighting solution designed to meet the demands of modern architectural and commercial spaces. With its sleek design and advanced features, the EC1-4 has become a popular choice for architects, designers, and facility managers looking to create well-lit environments that enhance aesthetics while providing energy savings.

One of the standout characteristics of the EC1-4 is its advanced LED technology. This fixture utilizes high-quality LED modules that deliver bright, consistent illumination while consuming significantly less power compared to traditional lighting systems. The EC1-4 is available in various color temperatures, ranging from warm white to cool daylight, allowing users to customize the ambiance of their spaces according to their needs.

Another key feature of the Lightolier EC1-4 is its exceptional light distribution. The fixture is designed to provide even lighting across the entire area, reducing the occurrence of harsh shadows or dark spots. This is particularly beneficial in environments where visual clarity and comfort are critical, such as offices, retail settings, and educational facilities.

The EC1-4 also boasts an integrated dimming system, offering users greater control over their lighting levels. This functionality not only enhances the user experience but also contributes to energy savings by allowing for reduced lighting levels when full brightness is not required. Furthermore, the fixture supports various control options, including digital dimming and compatibility with building management systems, enabling seamless integration into existing infrastructure.

Durability is another hallmark of the Lightolier EC1-4. Constructed with high-quality materials, this lighting solution is designed to withstand the rigors of daily use while maintaining its aesthetic appeal. Its robust build ensures longevity, reducing the need for frequent replacements and maintenance.

The Lightolier EC1-4 is not just functional; its stylish design makes it suitable for a wide range of applications. Whether used in commercial spaces, educational institutions, or hospitality environments, the EC1-4 enhances the overall design language of the space while providing exceptional lighting performance. With its impressive combination of technology, features, and aesthetics, the Lightolier EC1-4 stands out as a premier choice for anyone looking to elevate their lighting experience.