Lighting Systems EC1-6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energos Control System 3-Light T5 per 4' (121.92cm) (Nominal) Louver

Feature Specifications – Energos Control System (For standard Energos fixtures consult appropriate EG spec sheets)

Feature Specifications

Electrical

Dedicated low voltage (24 VDC) circuit controls the Energos Control Systems. The line voltage circuits control all the standard ballast functions including A/B switch- ing, Dimming and Emergency Battery Pack operations.

Occupancy Sensors:

Time delay is factory pre-set to 30 minutes.

Time delay can be field adjusted from 30 minutes to a minimum of 30 seconds.

Daylight hold-off is factory pre-set to 120 ft-candles (1291.67m-candles).

Daylight hold-off is field adjustable from 120 ft-candles (1291.67m-candles) down to 10 ft-candles (107.64m-candles).

Sensors are designed for a detection area (sensitivity diameter) of 16' (487.68cm) when suspended 10' (304.80cm) AFF. Lowering the sensor produces a smaller area of detection. See chart and diagram for additional information.

1. End Cap Sensor Mounting

2. Mid-mounted 8' (243.84cm)

 

Sensor Mounting

ECS occupancy sensors are available in two variations:

Mounted in the end cap.

The middle of an 8" (243.84cm) module.

The ECS system control-center is the Power Pack. The Power Pack, contained in each Master Module, interrupts the circuits when parameters dictate. The Power Pack can control up to 600 watts 120 VAC, and 1300 watts 277 VAC. A maximum of 10 sensors can be used on a single Power Pack. There is no limitation to the number of Power Packs that can be "daisy-chained" to a single ECS circuit.

Emergency battery packs can be used in conjunction with ECS for emergency egress lighting since all listed packs operate for a minimum of 90 minutes. EM Packs can be used as momentary lighting for emergency circuit for power transitions, and smaller packs are recommended for this purpose.

Coverage Diameter

16' 0" 14' 5" 12' 10" 11' 3"

Sensor Height AFF

7' 0"

8' 0"

9' 0"

10' 0"

Dimming ballasts can be used in conjunction with ECS. However, the control system will only perform ON or OFF operations and will not affect the level of dim- ming set by the dimming ballasts.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Serial Row Linking (SRL) provides multiple continuous row communication. For every run that SRL is required, order the appropriate SRL end set from page 2 of this Specification Sheet. Consult Energos Application Guide for more detailed definitions and examples.

Mountings

Cable suspension distances are on 48" (121.92cm) and 96" (243.84cm) centers, and consist of a 4 1/2" (11.43cm) diameter canopy finished white enamel. A 1/16" (0.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 12" (30.48cm) to 36" (91.44cm). Power feeds are 18 gauge silver braided cord with clear jacket.

Energos Occupancy Sensor

Coverage Zone Chart

Height of Sensor

Broadcast Diameter

Task Diameter

10' 0" (304.80cm)

 

16' 0" (487.68cm)

8' 0" (243.84cm)

9' 0" (274.32cm)

 

14' 5" (427.99cm)

7' 3" (214.12cm)

8' 0" (243.84cm)

 

12' 10" (391.16cm)

6' 5" (184.15cm)

7' 0" (213.36cm)

 

11' 3" (336.04cm)

5' 7" (154.18cm)

 

 

 

 

Job Information

 

Type:

 

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • C0808

Page 1
Image 1
Lightolier EC1-6 specifications Feature Specifications Electrical, Coverage Diameter, Mountings

EC1-6 specifications

The Lightolier EC1-6 is an advanced LED architectural lighting fixture that embodies innovation while providing versatile lighting solutions for various spaces. This fixture is particularly well-suited for commercial, retail, and hospitality environments, appealing to designers and architects who seek both aesthetic appeal and functional brilliance.

One of the standout features of the EC1-6 is its superb energy efficiency. Utilizing cutting-edge LED technology, the fixture consumes significantly less power compared to traditional lighting options. This not only reduces energy costs but also contributes to a lower carbon footprint, aligning with sustainability goals increasingly prioritized by businesses today.

The EC1-6 is designed with high-quality materials that ensure durability and longevity. With its sleek, minimalist design, it seamlessly integrates into any environment, making it a popular choice for contemporary spaces. The fixture is available in various finishes, allowing for customization to match the overall decor of the building.

Another defining characteristic of the Lightolier EC1-6 is its exceptional light output. The fixture provides uniform illumination and can be adjusted to create the desired atmosphere. It offers a range of color temperatures, from warm whites to cooler tones, giving users the flexibility to tailor their lighting according to specific needs and moods.

The EC1-6 is equipped with advanced control options, including dimming capabilities and compatibility with smart lighting systems. This means that users can create dynamic lighting scenes and adjust brightness levels effortlessly. Such flexibility enhances the functionality of spaces, making it ideal for venues that require varying lighting conditions throughout the day.

Additionally, the EC1-6 features a well-engineered optical system that minimizes glare and enhances visual comfort. This aspect is particularly important in workspaces where eye strain can be an issue. The fixture’s thoughtful design ensures that light is distributed evenly without harsh shadows or hotspots.

In summary, the Lightolier EC1-6 is an exemplary lighting solution that merges efficiency with elegance. Its range of features, including energy-saving LED technology, customizable finishes, exceptional light output, and smart control options, make it a standout choice for any modern project. Whether illuminating retail spaces, office environments, or hospitality settings, the EC1-6 delivers a blend of versatility and performance that meets the demands of today's lighting challenges.