Lightolier GV4WB332 SURFACE FLUORESCENT 3 LAMP, T8 OR T12, Ordering Information, Specifications

Section 6A/Folio P20-61

														GUARDSMAN				GV4WB332
Page 2 of 2											VANDAL RESISTANT WRAPAROUND, 15-5/16" WIDE, 4' LENGTH
															SURFACE FLUORESCENT 3 LAMP, T8 OR T12
Model No. GV4WB332120O3											LER = FW - 75			IW = 86	BF = 0.93
											Comparative yearly lighting energy cost per 1000 lumens = $3.20
		coefficient of utilization										typical V.C.P.’s					candlepower
		pfc	20									Room	Mounting Height				angle	end	45	cross
		pcc	80			70			50			Size	Lengthwise		Crosswise		0	2339	2339	2339
		pw	70	50	30	70	50	30	50	30			8.5	10	8.5	10	5	2340	2337	2331
		RCR										30x30	58	61	52	57	15	2267	2302	2328
	0		93	93	93	91	91	91	85	85		40x40	55	57	47	52	25	2110	2208	2274
	1		85	81	79	82	80	77	75	72		60x30	59	62	56	60	35	1876	2053	2133
	2		78	71	67	76	69	65	66	61		60x60	52	54	42	46	45	1534	1730	1757
	3		71	64	56	68	61	56	58	54		100x100	50	51	37	40
																	55	866	1020	973
	4		66	56	50	64	55	48	53	46
																	65	474	540	679
	5		60	51	44	58	50	42	46	42
																	75	260	310	453
	6		56	46	39	54	45	38	42	36
																	85	68	184	322
	7		52	41	34	50	40	34	39	33
																	95	0	134	266
	8		47	38	30	46	36	30	35	29
	9		45	34	28	44	34	28	33	27							105	1	137	205
	10		41	32	26	40	32	26	29	25							115	4	94	129
																	125	8	60	78
																	135	10	45	60
																	145	9	34	47
																	155	9	22	33
																	165	8	12	17
																	175	8	7	9

ORDERING INFORMATION

Explanation of Catalog Number. Example: GV4WB332120O3GLR

GV

4

WB

3

FIXTURE

LAMP

VOLTAGE:

OPTIONS:

LENGTH

QUANTITY

120 or 277

Add appropriate

suffix to catalog

GUARDSMAN

FIXTURE

LAMP TYPE/

BALLAST

TYPE:

no, ie: (GLR)

VANDAL

TYPE:

FIXTURE LENGTH:

1 & 2 Lamp Mag. T12

LE

RESISTANT

WB=Wraparound

32=T8

20THD

10THD

15-5/16" wide

34=T12

1 & 2 Lamp Elec. T8

SO*

HI*

(nominal 48")

1-3 Lamp Elec. T8

O3*

H3*

*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

SCREWDRIVER: For holt head screw. Order Catalog Number LP156737. ELECTRICAL/WIRING OPTIONS Consult factory

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

SPECIFICATIONS

PERFORMANCE: In an installation of 3 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .81. To reduce glare the VCP shall be not less than 42 either cross- wise or lengthwise (at 100fc level) and the average brightness at 65° shall not exceed 2729 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 72.8%.

MATERIALS: Chassis parts are die formed code gauge cold rolled steel.

FINISH: Multi-stage phosphate treated for maximum corrosion resistance and finish coat high reflectance baked white enamel.

SPECIFICATIONS (continued)

LENS: Prismatic lens is 50% DR (impact resistant) and 50% standard acrylic with a nominal thickness of 1/8", withstands 70 ft. lbs. impact without breaking. SCREWS: Tamper resistant holt head screws secure lens to housing. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902