Lightolier
45 INDUSTRIAL WAY, WILMINGTON, MA 01887
INSTALLATION INSTRUCTIONS FOR LYTECEL (Both LI and LC)
1 ACCESS PLATE
Remove Access Plate by sliding Access Plate in the direction of Arrow 1. To remove, lift up and slide in the direction of Arrow 2. Bend Fixture Tab up out of body and make ground and ballast connections. Bend Fixture Tab back to original position. Replace Access Plate by reversing removal instructions.
| 1. | Access | Ground | ||
| Plate | ||||
Access | Screw | ||||
|
| Access | |||
Plate |
|
|
| ||
Opening |
|
| Plate | Fixture | |
|
|
| Opening | ||
|
|
| Tab | ||
2. |
|
|
| ||
|
|
|
| ||
Tab | Access |
|
|
| |
Plate |
|
|
| ||
|
|
|
| ||
| Opening |
|
|
|
2 INSTALL FIXTURES onto
Fixture
3 | CONTINUOUS ROW COUPLER (LC UNITS |
| ONLY) Remove screw as shown. Rotate |
Continuous Row Coupler (both sides of
Fixtures) and secure Fixtures together with Screw. Tighten all Screws to secure Fixtures to
Fixtures | Fixtures |
Continuous |
|
Row Coupler |
|
| Hold- |
Screw | down Clip |
| |
Hold- | Continuous |
down Clip | Row Coupler |
Screw | |
| |
|
4 Install
Fixtures
Hold- down Clip
5 | To open Louver, |
|
|
press Spring Latch | Fixtures | Spring | |
| in direction of | ||
|
| ||
| Arrow. To close, |
| Latch |
|
|
|
insert louver into Fixture until Spring Latches automatically engage.
Screw
© Lightolier 2003 | Printed in U.S.A. |