Lightolier specifications Lighting Systems LFK3, 1BHF

PG

, Job Information, Type, 8.64cm

Lighting Systems LFK3

1BHF

PG

-JHIU
5
1FS

'PPU
DN
/PNJOBM
4FDUJPO

4.895” (12.43cm)

4.295" (10.91cm) 3.400"

(8.64cm)

Ordering Information

Family	Lamps	Shielding
LFK	2	N
	2 = 2 lamps per	N = No
	4’ (121.92cm)	Sheilding

Complete Ordering Instructions below.

		1	2
	5	4	3
	Wattage		Voltage
28 = 28w T5			1 = 120v
54 = 54w T5			2 = 277v
2D = 28w T5 Dimming
5D = 54w T5 Dimming
2E	= 28w T5 Emergency Pack
5E	= 54w T5 Emergency Pack

Half Scale

Length	Options
4 = 4’ (121.92cm)	DS = Dual Switch
8 = 8’ (243.84cm)	X4 = 4 Through Wires
	X5 = 5 Through Wires

Features

1.Extrusion: Extruded aluminum, painted white.

2.Housing: Multi-layered 5/8" (1.59cm) thick polycarbonate panels with patented prism design. Clear outer layer and an opal non-glare inner layer. Light transmission is 32% ASTM D1003 perpendicular to the panel. Reflectivity is more than 40% perpendicular to the panel.

3.Endcap: Die cast aluminum, painted white.

4.Ballast Channel: Accepts linear fluorescent ballasts up to 1.2" (3.05cm) wide by 1.2" (3.05cm) tall.

5.Lamp: T5 linear fluorescent, 28 or 54 watt. (by others).

Electrical

Ballast: Electronic and meets A.N.S.I. starting, end of life protection, T.H.D., "A" sound rating, and end-of-life specifications. Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Wiring: 3 Conductor 18 gauge wire. Color-coded quick connectors allow ease of connection for fixture modules.

Dimming: Advance Mark X. Use Advance compatible 2 wire control (no extra lead is required in the luminaire).

Emergency Battery Pack: 54 Watt: 390-700 Lumens for 90 minutes, 28 Watt: 370-520 Lumens for 90 minutes.

Dual Switching: Order the DS option for separate row switching. DS option comes complete with the 4th through wire option.

4 and 5 wire: Order X4 for EM Battery Pack. For non-standard dimming options order X5 option for Osram or DALI 54 watt dimming, X4 option for Lutron HiLume or ECO-10 54 Watt dimming.

Consult Factory for any additional wiring conditions.

Finish

Powder coated white baked enamel. Custom colors available, consult factory.

Mounting

Mounting locations are adjustable along the top of the extrusion. Cable suspension (not shown) consists of 4 1/2" (11.43cm) diameter canopy finished white enamel, 1/16" (0.16cm) diameter stainless steel aircraft cable adjustable up to 36”

(91.44cm). Draw-tight connector to create hairline seam between joiner modules.

Ordering Instructions

Individual Fixtures:

1.Order number of MODULES required.

2.Order one POWER FEED CABLE END SET per MODULE.

Continuous Rows:

1.Determine run length.

2.Order the appropriate number of MODULES for the complete run.

3.Order one POWER FEED CABLE END SET per run.

4.Order one INTERMEDIATE CABLE SET per MODULE minus one per run.

5.For runs that exceed amperage limits, order the appropriate number of

CABLE/CORD SET.

Labels

UL , cUL and I.B.E.W. Patent Applied For.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:


"JSQPSU
3PBE
'BMM
3JWFS
."

t


t
'BY



We reserve the right to change details of design, materials and finish.

XXXMJHIUPMJFSDPN
½

1IJMJQT
(SPVQ
t #