Lightolier LWBU Series Page 2 of, Photometry, Ordering Information, Options/Accessories, Lwbu

	Universal Wall LWBU Series
Page 2 of 2	Wall Mounted Fluorescent, 7-5/8" Width, 24", 36", 48" Lengths
	Uplight/Downlight or Downlight Only, 1 or 2 Lamp T8

Photometry

Model No. LWBU232UNVSO (Uplight/Downlight) Photometry

Model No. LWBU232UNVSO (Downlight)

G96143	G96152
	LWBU232UNVSO (Downlight)
LWBU232UNVSO (Uplight/Downlight)

THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY VARY FROM LABORATORY PERFORMANCE. THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY VARY FROM LABORATORY PERFORMANCE.

Ordering Information

Explanation of Catalog Number. Example: LWBU232UNVSOEM

LWBU

LWBU Universal	Lamp Quantity:	Lamp Fixture Length:	Voltage:
Wall Mounted	1 = 1 Lamp	17=T8, 2' Length	120 or 277
White Body	2 = 2 Lamp	25=T8, 3' Length
Fluorescent		32=T8, 4' Length	UNV:
Uplight/Downlight			Universal
or			Voltage
Downlight Only			120-277

				Options:
			Add appropriate
			suffix to catalog
Ballast Type:				no, ie: (EM)
	<20THD		<10THD
1 & 2 Lamp Elec. (T8)		SO*	HI*
LOL T8 Dimming		PS	–
*Instant Start Standard

Other dimming options. Consult factory.

Options/Accessories

Fusing: Internal fast-blow fusing. Suffix: GLR. Internal slow-blow fusing. Suffix: GMF.

Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz. One per fixture:

Suffix: R. One per ballast: Suffix: B.

Emergency Power Pack: Factory installed emergency power pack includes charger and inverter concealed in fixture channel. Upon loss of AC power, operates one lamp at reduce light. Suffix: EM.

Electrical Wiring Options: Consult factory.

Note: Consult factory for availability of options for nominal 2' long fixtures.

Specifications (continued)

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Specifications

Materials: Chassis parts are die-formed code gauge cold rolled steel. Refractor—one-piece virgin acrylic.

Finish: Chassis exterior—white baked acrylic enamel. Cavity—white baked acrylic enamel minimum 86% reflectance. Phosphate undercoating.

Refractor (downlight): One-piece injection-molded, (full re-entrant virgin acrylic with Catadioptric side, ends and wall design with diamond shape square base male conical prisms on horizontal surface.

Job Information	Type:
Lightolier a Genlyte Thomas Company		www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Copyright 2004 Lightolier		Section4A/Folio I20-18