Calculite® ProSpec® Linear Downlight PB4A7050
Page 1 of 2 | 4 Light AR 70 Series B |
33 7/8" |
|
| |
9 | 7 |
| |
|
| ||
8" |
|
| |
13" |
| 17" | |
|
| ||
Top View | 13 | 8 3/4" | |
Depth | |||
|
|
Flanged Trimless
|
|
| 31 3/8" L X 10" W |
|
| |
10 | 8 | 5" | 5" | 5" | 5 | |
O.C. | O.C. | O.C. | ||||
|
|
| ||||
|
|
|
|
| 4 | |
|
|
|
|
| 6 | |
| 1 | 2 | 3 | 11, 12 |
| |
|
|
| 20" L X 5" W Opening |
|
|
PB4A705EBL = (Flanged) Black/White | PB4A705EBTL = (Trimless) Black |
PB4A705EWL = (Flanged) White | PB4A705EWTL = (Trimless) White |
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
Ceiling Cutout: 21 1/16" L x 6 3/16" W
Ordering Information: AR 70 Series B
Cat. No. | Lamp | Ceiling Trim | Aperture Finish |
PB4A705EBL | (4) 50W AR 70 | Overlap | Black with White Flange |
PB4A705EWL | (4) 50W AR 70 | Overlap | White with White Flange |
PB4A705EBTL | (4) 50W AR 70 | Trimless | Black |
PB4A705EWTL | (4) 50W AR 70 | Trimless | White |
|
|
|
|
1.Aperture Frame: Provides clean support for lamp holders and overlapping flange or trimless installation. Extruded aluminum. Rigidly welded together on all corners.
2.Media Cartridge: Allows convenient loading and removal of up to one accessory. Easily installed and removed for lamping with a simple twisting motion. Constructed of formed aluminum.
3.Adjustable Ring: Allows 360° horizontal and 45° (on width) and 45° (on length) vertical adjustment.
4.Tortiontite Spring: For easy installation of aperture frame.
5.Housing: Die formed 22 ga. steel. Finish: Black.
6.Mounting Brackets: Adjustable vertically from outside of housing.
7.Thermal Protector: Meets NEC, UL , and CSA requirements.
8.Lampholder: Double contact bayonet base with 250°C #18 gauge Teflon® leads.
9.Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from below.
10.Lamp and Accessory Support: .032" steel, flared for easy entry of Media Cartridge.
11.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
12.Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
13.Transformer Housing: Die formed 18 ga. steel.
ElectricalElectronic Transformers: Offer reliable operation and are accessible from below for servicing. 12V Secondary.
Dimming Controls: Use only dimmers specifically designed for use with electronic transformers. Low Voltage fixtures may produce audible sound when used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
All painted finishes are powder coated baked enamel.
Options & AccessoriesAccessories: 2 1/2" dia. series, filters, lenses, screens and louvers. (2) accessories maximum, including lamp cover glass. Lamp guard glass may be replaced with solid glass accessory.
LabelsUL/cUL (Suitable for Damp Location), I B E W
Teflon® is a registered trademark of E.I. DuPont.
US Patent Pending | Type: |
Job Information |
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • B1105