Lightolier PLA2G12LS232 Photometry, Ordering Information, Options & Accessories, Specifications

Section 2/Folio G50-62 Rev. A

	Paralyte 2448 PLA2G12LS232
Page 2 of 2	2' x 4' Recessed Fluorescent, 3-1/8" Deep, 12 Cell Parabolic Louver
	Static and Air Return 2 Lamp, T8 or T12

Photometry Model No. PLA2G12LS232120SO

G91070

PLA2G12LS232120SO

LER=FP-67.5 IW - 58 BF - 0.87

Comparative yearly lighting energy cost per 1000 lumens=$3.56

coefficients of utilization — zonal cavity method							(effective floor cavity reflectance 0.20)
	RF		20					20					20
	RC		80					50					30
	RW	70	50		30		50	30	10		50		30	10
	1	87	84		81		79	77	75		76		74	73
ratio	2	80	74		70		70	66	63		68		65	62
	3	73	66		60		62	58	54		60		56	53
cavity	4	67	58		52		55	50	46		54		49	45
	5	62	52		45		50	44	40		48		43	39
room	6	57	47		40		45	39	35		43		38	34
	7	53	42		35		40	35	30		39		34	30
	8	49	38		32		37	31	27		36		31	27
	9	46	35		29		34	28	24		33		28	24
	10	43	32		26		31	26	22		30		25	22
visual comfort probability			(rated lumens per lamp 3150.)
	room size				ceiling height						ceiling height
W		L		8.5	10.0	13.0	16.0			8.5	10.0	13.0		16.0
20		20		76	72	72	83			73	66	66		73
20		30		79	75	73	73			76	69	66		69
20		40		82	78	76	75			79	72	69		68
20		60		83	80	78	77			81	75	72		71
30		20		80	76	72	79			78	71	68		73
30		30		83	79	73	70			81	74	67		68
30		40		84	81	76	72			82	76	70		67
30		60		86	82	78	75			84	78	73		70
30		80	lengthwise	87	83	80	77		crosswise	85	80	75		72
40		40		86	83	78	72			84	79	73		68
40		20		83	79	75	78			80	75	72		73
40		30		85	81	75	71			82	77	71		69
40		60	luminaries	87	84	80	75		luminaries	85	81	75		71
40		80		88	85	81	77			86	82	77		73
40		100		88	85	82	78			86	82	79		75
60		30		85	83	78	73			83	78	73		72
60		40		87	84	80	74			85	80	75		71
60		60		88	85	81	76			86	82	77		73
60		80		89	86	83	78			87	83	79		75
60		100		89	86	83	79			87	83	80		76
100		40		87	84	81	77			85	80	77		72
100		60		88	85	83	79			86	82	79		74
100		80		88	86	84	80			87	84	80		77
100		100		89	87	84	81			87	84	82		78

Ordering Information

Explanation of Catalog Number. Example: PLA2G12LS232120SOGLR

PL		A
Paralyte		Body Style:
2448:	A= Air Handling
3-1/8" Deep		/Static

Parabolic

Precision

Contoured

Pre-anodized

Aluminum

Louver

2

G

12

S

Fixture

Ceiling Type:

Number of

Ballast Cover

Lamp

Lamp/

Voltage:

Options:

Width

G=Grid (lay-in T bar)

Cells

S=Single V Reflector

Quantity:

Fixture Length:

120 or 277

Add appropriate suf-

2 or 4 Lamps

32=T8

fix to catalog no.,

34=T12

ie: (GLR)

(Nominal 48")

Ballast Type:

Louver Finish:

1–2 Lamp Mag. T12

LE

L

<20THD

<10THD

= Low Iridescence

1–2 Lamp Elec. T8

SO*

HI*

Semi-Specular (standard)

W = White Paint

2–2 Lamp Elec. T8

SO*

HI*

1–4 Lamp Elec. T8

O4*

H4*

LOL T8 Dimming

PS*

–

Other dimming options. Consult factory.

Options & Accessories

Prewiring: 3/8” factory prewired cable (three no. 18 AWG leads, 6’ long),

Suffix: FF6, (Four no. 18 AWG leads, 6’ long), Suffix: FF14.

Fusing: Internal fast-blow fusing. Suffix: GLR. Internal slow-blow fusing. Suffix: GMF.

Fluorescent Emergency Lighting System: Factory-installed emergency power battery pack with charger and inverter, concealed in fixture channel. Operates one fluorescent lamp at reduced light output for 90 minutes. Suffix: EM.

Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz.

One per fixture. Suffix: R. One per ballast. Suffix: B.

Electrical Options: Special wiring, fusing or dimming ballasts and installed lamps are available, consult your Lightolier representative or factory.

T-Bar Spacer: If T-bar is less than 1-1/2” deep, order Catalog Number: STC. 2 each end is required.

Specifications

Performance: In an installation of 2 lamp 32W Iuminaires in a room cavity ratio of 1, with reflectance of 80% ceiling, 50% wall, 20% floor, the C.U shall not be less than 84. To prevent glare the VCP shall not be less than 86 either lengthwise or crosswise (at 100fc level) and the average brightness at 65° shall not exceed 1347 foot-Iamberts. To control veiling reflections, luminaire output in the 3C°-90° zone shall not be less than 72.1%.

Specifications (continued)

Air Return: Designed to provide optimum air return. Air is returned through the lamp compartment for all ceiling systems and direct to plenum through slots in slot grid and narrow grid ceiling systems.

Materials: Chassis parts are die-formed code gauge cold rolled steel. Housing is embossed for rigidity with all edges turned up for safe handling. Louver is pre-anodized aluminum (Coilzak® or equal).

Finish: Louver–semi-specular anodized low iridescence, vertical grain reflector sheet. Cavity–white baked polyester minimum 86% reflectance. Phosphate undercoating. Chassis exterior–black baked polyester enamel.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3” of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0902