Lightolier SL402A manual Zylinder Glas, Spectral, Optic Forms, Architectural Lighting, bottom

		02-04
Zylinder Glas	Spectral	SL402A
Optic Forms	Architectural Lighting
1-150W T7 Ceramic Metal Halide

		Ordering Guide (complete unit only)
Cat. No.	Lamp (clear)		Volts	Finish
SL402AH1	1-150W T7 CMH (M142) Double Ended		120V (electronic)	Stainless Steel & Etched Glass
SL402AH2	1-150W T7 CMH (M142) Double Ended		277V (electronic)	Stainless Steel & Etched Glass
SL402AH5	1-150W T7 CMH (M142) Double Ended		120/277/347V (mag)	Stainless Steel & Etched Glass

Features

Optical System : Single lamp powers an upper wide spaced indirect optic and a lower narrow spaced direct sand-blasted optic. Glass shield redirects light into the space. Upper wide spaced spun Alzak optic with clear glass micro switch protected. Narrow spacing spun Alzak downlight optic. Bottom glass sandblasted outer ring with clear centre.

Stainless Steel Construction : Quality all stainless steel form and hardware.

Hardware : Exposed hardware adds high design element to the form.

Ballast : New low wattage CWA magnetic or electronic ballast assure long lamp life and stable operation of the ceramic metal halide lamp source.

Ballast Compartment : Stainless steel construction with removeable ballast cover Hollow rods shield wiring to optical chamber.

Optical Chamber : Circular brushed stainless steel construction and all stainless

steel hardware, with clear Borosilicate glass at top and sand blasted Borosilate glass at

Electrical

Lampholder : RX7s, double ended base.

Electronic Ballast : Electronic ballast maintains constant lamp characteristics throughout the life of the lamp and through a wide range of operating voltages. Ballasts available for 120 volts and 277 volts operation. No universal ballast option.

Microswich : Remote, turn off electricity during maintenance into the lamp compartment.

H1 : Electronic MH / CMH 120V

H2 : Electronic MH / CMH 277V

Magnetic Ballast : CWA (Constant Wattage Autotransformer) with triple tap 120/277/347 volts operation. Ballast maintains steady lamp operating characteristics for longer lamp life and color stability.

H5 : Magnetic CWA MH 120/277/347V

bottom.

Ceramic Lamp Source : CMH lamp source assures stable color over the life of the lamp and longer lamp life.

Large Glass : Sand blasted glass suspended between the two chambers. Hollow threaded rods joined together to hold the glass in position.

Dome Reflector : For a better direct distribution pattern, the Dome Reflector can be installed onto the Large Glass. See the appropriate photometry on reverse side of sheet.

Options and Accessories

For wall unit, see Zylinder Wall SL403.

Fuse : 2 Amps internal fusing. Consult your Lightolier representative. Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347 volts.

	Finish
	Stainless steel : Brushed high quality stainless steel alloy.
Mounting	Labels
Mounting : Suitable for mounting on standard octogonal box. Must be held in	UL "c/us" Listed. For dry locations only.
place by additional hardware to support heavy weight luminaire.
Luminaire Weight : 39 lbs (magnetic), 36.5 lbs (electronic).

WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY

THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.

Lightolier Canada, 3015 Louis Amos Lachine, (Quebec) H8T 1C4