Lightolier SS 2 LAMP Photometry, Ordering Information, Options/Accessories, Specifications, Type

SS Staggered Strip Surface Fluorescent SS 2 LAMP

Page 2 of 2

Photometry

REPORT NO: G89007

CATALOG NO: SS4S232HPF120SO

LAMP TYPE: 2F32 T8

LUMENS PER LAMP: 2850 TOTAL

EFFICIENCY: 89.5%

CIE TYPE: Semi-Direct

SPACING CRITERIA: 1.6

SHIELDING ANGLE: 180

4-1/4" Wide, 1-5/8" Deep, 27", 39", 51", 75", 99" Length, Individual or Tandem,

Model No. SS4S232HPF120SO	LER = FP - 38.7			IW - 58.0		BF - 0.87					2 Lamp T8 or T12
	Comparative yearly lighting energy cost per 1000 lumens = $6.20
		coefficients of utilization — zonal cavity method					(effective floor cavity reflectance 0.20)
			RF		20			20			20
			RC		80			50			30
			RW	70	50	30	50	30	10	50	30	10
			1	89	84	79	71	68	64	64	61	58
		ratio	2	80	71	64	60	55	51	54	50	46
			3	72	62	53	52	46	41	47	42	38
		cavity	4	65	54	45	46	39	34	41	36	31
			5	59	47	39	40	34	28	36	30	26
		room	6	54	42	33	36	29	24	32	26	22
			7	50	37	29	32	25	21	29	23	19
			8	46	33	25	29	22	18	26	20	16
			9	43	30	22	26	20	15	23	18	14
			10	40	27	20	24	18	13	21	16	12

Ordering Information

Explanation of Catalog Number. Example: SS4S232HPF120SOGLR†

SS

2

HPF

Staggered

Strip:

Fixture

Length:

Lamp Configuration:

Lamp

Quantity

Lamps:

Ballast Type:

4-1/4" wide

2=27"

S=Standard

(By Others)

HPF=High Power

channel

3=39"

T= 3' or 4' Lamps

17= 17 watt (T8)

Factor

4=51"

in Tandem

20= 20 watt (T12)

6=75"

(for 6' or 8' Units)

(Nominal 24")

8=99"

25= 25 watt (T8)

30= 30 watt (T12)

(Nominal 36")

†No Product Change. New Catalog Number Designation.

32= 32 watt (T8)

34= 40 watt (T12)

(Nominal 48")

Voltage:						Options:
120 or 277					Add appropriate
			Ballast:		suffix to catalog
						no., ie: (GLR)
1-2		Lamp Mag. T12		LE
	Standard Electro-
	Magnetic (20 or			P
	30 watts only)
				<20THD	<10THD
1-2		Lamp Elec. (T8)		SO*	HI*
1-4		Lamp Elec. (T8)		O4*	H4*
	LOL Dimming (T8)			PS	–

Options/Accessories

(Two lamps in tandem for 75" and 99" fixtures)

*Instant Start Standard

Other dimming options. Consult factory.

Fusing: Internal fast-blow fusing. Suffix: GLR.

Internal slow-blow fusing. Suffix: GMF.

Electrical Wiring Options: Consult factory.

Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz. One per fixture.

Suffix: R. One per ballast. Suffix: B.

Stem and Canopy Sets: Suspends fixture 6', 12', 18' or 24' from surface.

Catalog Number: ASC6 CSP (6"), ASC12 CSP (12"), ASC18 CSP (18"),

ASC24 CSP (24").

Specifications

Materials: Chassis parts are die formed heavy duty code gauge cold rolled steel.

Ballast cover–code gauge cold rolled steel, secured by plated quarter-turn latches.

Finish: Chassis exterior–baked white polyester enamel, minimum reflectance 86%.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0403

Section3A/Folio H130-12