Lincoln™
Impinger® Countertop
Single Belt Conveyorized Electric Oven
Models:
1301 |
| 1302 |
|
|
|
Standard Features:
• | AIR IMPINGEMENT uses hot | • Customer specific air fingers |
| air under pressure which | on top and bottom allow |
| surrounds food with small | for heat to be adjusted and |
| jets of hot air. This allows | controlled by zoning. |
| for rapid heating, cooking, |
|
| baking and crisping of foods, |
|
| two to four times faster |
|
| than conventional ovens, |
|
| depending on food |
|
| product cooked. |
|
• | Uniform heating/cooking of |
|
| food products offer a wide |
|
| tolerance for rapid baking at |
|
| a variety of temperatures. |
|
• | Safety of conveyorized |
|
| product movement is a |
|
| definite advantage over |
|
| batch type ovens, as it |
|
| eliminates the need for |
|
| constant tending. |
|
• | Oven has one |
|
| heating system |
|
Impinger® Countertop Oven
Specifications:
General: Electric Baking/Finishing Oven is self- contained, conveyorized and stackable up to two (2) high. It is designed for countertop use and must be used with appropriate
Controls: The oven controls are located on the front of the oven. It includes a power on/off switch, temperature control and conveyor speed control. A heating indicator light illuminates when heating to let you know when the oven is calling for heat.
Construction: Exterior is fabricated from No. 4 finish stainless steel. The air distribution system consists of an axial type fan powered by 1/10 hp AC motor. The headed air is forced through four (4) distribution fingers located in the baking chamber with two (2) above the conveyor belt and two (2) below. Each finger has required number of holes to create the air impingement effect on the food product passing through the baking chamber on the conveyor belt. The conveyor belt is a flexible stainless steel design with capacity for 16” (406mm) wide product and a travel distance of 31” (787mm) on the standard conveyor or 50” (1269mm) on the extended conveyor, of which 20” (508mm) is in the baking chamber. The direct drive conveyor is powered by a DC motor. The fuses for the controls and blower motor are located on the side of the control box.
1111 North Hadley Road | Tel 1.260.459.8200 | www.lincolnfp.com | ||
P.O. Box 1229 | Fax 1.260.436.0735 |
|
|
|
Fort Wayne, Indiana | E mail info@lincolnfp.com |
|
|
|
|
|
| ||
| web www.lincolnfp.com |
|
|
|
|
|
|
|
|