Performance, Features, System Selection

K1480-1

K617-1

K1819-10KP653-052SK1524-1K1557-1

K2286-1(1)

K1842-10(2)

K910-2

K586-1

K1480-1

K1559-1

K1501-10KP1505-045SKP557-1K471-21(1)K1842-10(2)K910-2

K586-1

A CLOSER LOOK

PERFORMANCE

•Provides line voltage compensation for maintaining weld consis- tency, even with changes of ±10%.

•For heavy duty MIG and flux-cored applications.

•Sub-arc welding with up to 5/64” (2.0mm) diameter electrodes.

•Arc gouging up to 3/8” (10mm) carbons.

FEATURES

•Quick, simple 14-pin MS-type (Amphenol) wire feeder connection.

•Low flat-top case can be placed under a workbench or stacked on top of each other for smaller footprint.

Key Controls

1.Optional Voltmeter and Ammeter

2.Output Voltage Control

3.Pilot Light

4.Thermal Protection Light

5.Input Power On/Off Switch

6.Local/Remote Control Switch

7.Output Terminals On/Remote Switch

•“Cold” electrode with a solid state contactor when the trigger is released for added safety.

•Thermal trip indicator light.

QUALITY AND RELIABILITY

•Electronic and thermostatic protection from current overload or excessive temperatures.

•PC boards have built-in diagnostic routines for quick and easy troubleshooting.

•Circuit boards are protected with a specially insulated coating to extend life and ensure reliable performance.

•Solid state circuitry provides extra long life during repetitive applications.

•Three-year warranty on parts and labor.

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

•CSA approved for 60 Hz models.

SYSTEM SELECTION

Typical MIG Welding Systems

CV-655 / LF-72 Heavy Duty Wire Feeder
• CV-655 Power Source	K1480-1
• LF-72 Heavy Duty	K2327-3
• 600 Amp Weld Power Cable – 10 ft.	K1842-10(2)
• Work Clamp	K910-2

• Harris® Flowmeter Regulator and Gas Hose K586-1

CV-655 / LN-742 Wire Feeder

Best for applications where more process control is required – for arc starting, welding and crater control!

• CV-655 Power Source

• LN-742 (Two Roll) Wire Feeder

• Control Cable - 10 ft.

• .045 Drive Roll

• Universal Stand

• Swivel Platform

• Magnum 400 Gun & Cable Assembly

• 600 Amp Weld Power Cable – 10 ft.

• Work Clamp

• Harris Flowmeter Regulator and Gas Hose

CV-655 / LN-10 Wire Feeder

Where premium welding performance and control is demanded – this system delivers!