Lincoln Electric IM10064 manual Installation, Technical Specifications Vantage 580 K2963-1

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - VANTAGE® 580 (K2963-1)

Make/Model

PERKINS 404D-22T

Description

4cylinder 43 HP

1850 RPM

Turbo Charged

water cooled

Diesel Engine

INPUT - DIESEL ENGINE
Speed (RPM)	Displacement	Starting	Capacities
	cu. in. (ltrs.)	System
	135.6(2.2)	12VDC Battery &	Fuel: 20 gal.
High Idle 1850		starter	(75.7 L)
	Bore x Stroke inch (mm)	(Group 34; 650	Oil: 8.45Qts. (8L)
Full Load 1850		cold crank amps)
	3.43 X 3.64	65 Amp Alternator	Radiator Coolant:
Low Idle 1400	(87.1 x 92.5mm)	W / Built in Regulator	11.5 Qts. (10.9L)

RATED OUTPUT @ 104° F (40° C) - WELDER

Welding Process	Welding Output	Output Range	Max. Weld OCV
	Current/Voltage/Duty Cycle		@Rated Load RPM
DC Constant Current	500A / 40V / 100%	30 TO 525 AMPS
	525A / 38V / 60%		60 Volts(2)
DC Pipe Current	300A / 32V / 100%	40 TO 300 AMPS
Touch-Start™TIG	250A / 30V / 100%	20 TO 250 AMPS
DC Constant Voltage	500A / 40V / 100%	14 TO 40 VOLTS
	525A / 38V / 60%		60 Volts
Arc Gouging	500A / 40V / 100%	200 TO 580 AMPS

RATED OUTPUT @ 40° C (104° F).- GENERATOR

	Auxiliary Power (1) (60 Hz)
Outlets x Phase	Voltage	Power	Amps
1 x 3ph	415 Volts	20 Kva	28 Amps
2 x 1ph	240 Volts	7.2 Kva	15 Amps

ENGINE

LUBRICATION		EMISSIONS			FUEL SYSTEM			GOVERNOR
Full Pressure		EPA Tier 4		Mechanical Fuel Pump, Auto air bleed				Electronic
with Full Flow Filter		Interim Compliant	system, Electric shutoff solenoid, Indirect fuel injection.
AIR CLEANER	ENGINE IDLER				MUFFLER	ENGINE PROTECTION
				Low noise Muffler:			Shutdown on low oil
Single Element		Automatic Idler		Top outlet can be rotated.			pressure & high engine
				Made from long life, aluminized steel.			coolant temperature
ENGINE WARRANTY:	2 years / 2000 hours, all non-electric components, 3 years major non-electric compo-
nents . See Perkins warranty for details.
		PHYSICAL DIMENSIONS
HEIGHT		WIDTH			DEPTH		WEIGHT
35.94 (4) in.		27.05 in			62.59 in.
							1290 lbs. (586kg.)
913 mm		687 mm			1590 mm

(1)Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

(2)Reduced to less than 30V in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.

(3)Maximum per circuit breaker rating.

(4)To Top of enclosure. Add 7.35 (186.7mm) to top of exhaust. Add 3.87”(98.3mm) to top of Lift Bail.

VANTAGE® 580