A-8

INSTALLATION

A-8

 

 

 

CONNECTION OF LINCOLN ELECTRIC WIRE FEEDERS

Connection of LN-7 or LN-8 to the RANGER 305G

1.Shut the welder off.

2.Connect the LN-7 or LN-8 per instructions on the appropriate connection diagram in Section F

3.Set the "WIRE FEEDER VOLTMETER" switch to either "+" or "-" as required by the electrode being used.

4.Set the "MODE" switch to the "CV WIRE " posi- tion.

5.Set the "ARC CONTROL" knob to "0" initially and adjust to suit.

6 Set the "WELD TERMINALS" switch to the "REMOTELY CONTROLLED" position.

7. Set the "IDLE" switch to the "HIGH" position.

Connection of LN-15 to the RANGER 305G

These connections instructions apply to both the LN-

15Across The-Arc and Control Cable models. The LN-15 has an internal contactor and the electrode is not energized until the gun trigger is closed. When the gun trigger is closed the wire will begin to feed and the welding process is started.

Shut the welder off.

For electrode Positive, connect the electrode cable to the "+" terminal of the welder and work cable to the "-" terminal of the welder. For electrode Negative, connect the electrode cable "-" terminal of the welder and work cable to the "+" terminal of the welder.

Across The-Arc Model:

Attach the single lead from the front of the LN-15 to work using the spring clip at the end of the lead. This is a control lead to supply current to the wire feeder motor; it does not carry welding current.

Set the "WELD TERMINALS" switch to "WELD TER-

MINALS ON"

Control Cable Model:

Connect Control Cable between Engine Welder and Feeder.

Set the "WELD TERMINALS" switch to "REMOTELY CONTROLLED"

Set the MODE switch to the "CV-WIRE " position.

Set the "WIRE FEEDER VOLTMETER" switch to either "+" or "-" as required by the electrode polarity being used.

Set the "ARC CONTROL" knob to "0" initially and adjust to suit.

Set the "IDLE" switch to the "AUTO" position.

Connection of the LN-25 to the RANGER 305G

WARNING

Shut off welder before making any electrical con- nections.

------------------------------------------------------------------------

The LN-25 with or without an internal contactor may be used with the RANGER 305G. See the appropriate connection diagram in Section F.

NOTE: The LN-25 (K431) Remote Control Module and (K432) Remote Cable are not recommended for use with the RANGER 305G.

1.Shut the welder off.

2.For electrode Positive, connect the electrode cable from the LN-25 to the "+" terminal of the welder and work cable to the "-" terminal of the welder. For electrode Negative, connect the elec- trode cable from the LN-25 to the "-" terminal of the welder and work cable to the "+" terminal of the welder.

3.Attach the single lead from the front of the LN-25 to work using the spring clip at the end of the lead. This is a control lead to supply current to the wire feeder motor; it does not carry welding current.

4.Set the MODE switch to the "CV-WIRE " position.

5.Set the "WELD TERMINALS" switch to "WELD

TERMINALS ON"

6.Set the "ARC CONTROL" knob to "0" initially and adjust to suit.

RANGER 305G

Page 16
Image 16
Lincoln Electric IM834-B manual Connection of Lincoln Electric Wire Feeders, Connection of LN-7 or LN-8 to the Ranger 305G

IM834-B specifications

The Lincoln Electric IM834-B is a state-of-the-art industrial inverter multi-process welder designed to meet the demands of various welding applications. Known for its versatility, this machine accommodates MIG, TIG, and stick welding processes, making it a go-to solution for welders in fabrication shops, maintenance facilities, and construction sites.

One of the standout features of the IM834-B is its advanced inverter technology. This technology allows the machine to convert incoming electrical power into a more efficient output, reducing energy consumption while delivering consistent performance. The inverter design also contributes to the welder’s lightweight and compact build, enhancing portability without compromising on power. Weighing significantly less than traditional transformers, the IM834-B can be easily transported between job sites.

Another key characteristic of the IM834-B is its user-friendly interface. The machine features an intuitive digital display that provides real-time feedback on welding parameters. This allows operators to make quick adjustments and ensures precise control over the welding process. The controls are designed with simplicity in mind, facilitating ease of use for both novice and experienced welders.

The IM834-B also incorporates advanced technologies that enhance weld quality and efficiency. It features a synergic control that automatically adjusts the voltage and wire feed speed according to the selected material and thickness. This makes it easier to achieve optimal welding conditions without extensive manual setup, thereby reducing the learning curve for new users.

Moreover, the IM834-B is equipped with robust safety features, including overcurrent and overheat protection. These safeguards ensure that the welder operates safely under varying conditions, extending the machine's lifespan and maintaining performance integrity.

In terms of welding capabilities, the IM834-B supports a wide range of materials, including steel, stainless steel, and aluminum, making it suitable for diverse applications. Its high duty cycle allows for prolonged usage, making it ideal for heavy-duty tasks.

In summary, the Lincoln Electric IM834-B is an innovative and versatile multi-process welder that combines advanced inverter technology, user-friendly controls, and exceptional safety features. Its lightweight design, efficiency, and adaptability to various welding processes make it an excellent choice for professionals seeking reliability and performance in their welding equipment.