Lincoln Electric LN-25 K1819-10 Wire Feeder Control Cable Weld Power Cable, Twist-Mate Cable Plug

SYSTEM SELECTION

ACROSS THE ARC SET-UP (with Electrode Cold Operation and Remote Voltage Control at LN-25)

For LN-25 K428 Model without Internal Contactor.

(Connections are for current equipment design. Subject to change without notice.)

42 Volt Remote Output Control Systems

CV-250, CV-300,

CV400-I, CV500-I,

CV-655, V350-PRO,

DC-400, DC-600,

DC-655, Ranger 250,	14 Pin
Ranger 250 LPG,
Ranger 305G,
Ranger 305D,
Commander 300,
Vantage 500,
Air Vantage 500

K1819-10 Wire Feeder Control Cable

Weld Power Cable

K624-1

Remote Output

Control Module

LN-25 Wire Feeder

K428 model onlyMagnum gun and cable assembly

Control Cable and Extensions

K1819-10Wire Feeder Control Cable, 10 ft. (3.0m) K1797-2514-pin Extension Control Cable, 25 ft. (7.6m) K1797-5014-pin Extension Control Cable, 50 ft. (15.2m)

WELD POWER CABLE SET-UP

CV-250,

CV-300,

CV400-I,

CV500-I,

V350-PRO

Weld Power Cable

LN-25 Wire Feeder

K428 model only

Magnum gun and

cable assembly

	Twist-Mate Cable Plug
Weld Power Cables		Twist-Mate Cable Plugs
K1841-25	Twist-Mate to Twist-Mate, 1/0, 350A, 60% duty cycle, 25 ft. (7.6m)	K852-70	for 1/0-2/0 cable
K1841-50	Twist-Mate to Twist-Mate, 2/0, 350A, 60% duty cycle, 50 ft. (15.2m)	K852-95	for 2/0-3/0 cable

CV-400, CV-655,
DC-400, DC-600,
DC-655, Ranger 250,
Ranger 250 LPG,
Ranger 305G,	Weld Power Cable			LN-25 Wire Feeder
Ranger 305D,				K428 model only
Commander 300,
Vantage 500,
Air Vantage 500
Engine Driven Welders
w/Wire Feed Module
			Cable Lug
Weld Power Cables				Cable Lug
K1842-10Lug to Lug, 3/0, 600A,		60% duty cycle, 10 ft. (3.0m)		S1119-14for 1/0-2/0 cable
K1842-35Lug to Lug, 3/0, 600A,		60% duty cycle, 35 ft. (10.6m)
K1842-60Lug to Lug, 3/0, 600A,		60% duty cycle, 60 ft. (18.2m)
K1842-110Lug to Lug, 4/0, 600A,		60% duty cycle, 110 ft. (33.5m)

Magnum gun and

cable assembly

LN-25 Wire Feeder

[5] www.lincolnelectric.com