Lindy 16 & 24 user manual Packing List, Specifications Introduction, LED Indicators, Status

16 & 24 Port Fast Ethernet NWAY Switch

User Manual English

LINDY No. 25009, 25017

www.lindy.com

Packing List

ƒ16 or 24 Port 10/100Mbps Fast Ethernet NWAY Switch

ƒ1 x power cable

ƒ19” Rack mount brackets with screws, rubber feet

ƒThis manual

Specifications

Introduction

Thank you for purchasing the LINDY Fast Ethernet NWAY Switch. This high performance network switch is ideal for small networks or for segmenting larger networks into smaller, connected subnets for improved performance.

All of its ports are capable of 10/100Mbps auto-negotiation, while the 10/100Mbps auto-sensing ability provides the easiest, most hassle-free way to integrate older 10Base-T network devices.

This switch delivers a dedicated 10 or 100Mbps connection to every attached client with no bandwidth congestion issues. It also supports an auto MDI/MDI-X function - each port can be used to connect to any other Ethernet device without the need for crossover cables!

Store-and-forward architecture is used by the switch to filter and forward data after each packet is received and examined to be free of errors. All of the ports support full and half-duplex operation which doubles the network bandwidth and allows the simultaneous transmission and reception of frames without causing collisions.

The ‘Plug & Play’ switch requires no special software to configure and is fully compliant with the 10Base-T specifications of the IEEE802.3 Standard and with 100Base-TX specifications of the IEEE802.3u Standard. Diagnostic LEDs on the front panel show the operating status of both the switch and the individual ports.

LED Indicators

ƒStandards: IEEE 802.3 10Base-T, 802.3u 100Base-TX, IEEE 802.3x Flow Control

ƒPorts: 16 or 24 x RJ-45 10/100Mbps Fast Ethernet

ƒAuto MDI/MDI-X (Auto crossover)

ƒNetwork speed: 10/100/Mbps & Full/Half-duplex mode auto detection

ƒSwitching Architecture: Store and Forward

ƒMAC Address: 8K

ƒBuffer Memory: 160KB

ƒNWAY Auto-negotiation: All ports

ƒDimensions: 441 x 130 x 44mm (WxDxH) 24 Port model

ƒDimensions: 441 x 161 x 44mm (WxDxH) 16 Port model

ƒPower Supply: internal 3.3V, 4A (100 ~ 240V AC, 50 ~ 60 Hz, external)

ƒOperating Temperature: 0-40°C

ƒOperating Humidity: 10-90% (Non-condensing)

ƒFor indoor use only

LED Status

On

Power

Off

On

Link/Act Flashing

Off

Operation

Power is on

Power is off

The port is connected

The port is transmitting or receiving data

No connection