English Manual
English 4
How to Use Your Wireless Audio / Mic Adapter
Caution: DO NOT power on the wireless audio reciver with both, the battery inserted and the power adapter connected at the same time as this may result in damage to the unit.
No external driver is required under OS support for Windows 2000, XP, Vista, Windows 7 and Mac OS. Please follow the steps below to complete the association process between the Wireless Audio Dongle and the Wireless receiver unit
1.Plug the Wireless Audio Dongle into the USB port of your PC or Mac
2.Power on the Wireless Audio receiver with either a battery inserted or use the power adapter provided.
3.Now plug either a pair of headphones or speakers into the audio output of the wireless receiver unit. Press and hold the Wireless Audio Transmitter Dongle pairing button for 3 seconds, then press and hold the Wireless Audio receiver Volume button for 3 seconds. You should hear a short audio beep from the headphones or speakers to indicate a successful association of the transmitter and receiver.
4.If you want to use the microphone, please press the volume control wheel for 1 second. This activates, respectively deactivates the MIC input.
5.Now the association has been completed you may start to use your Wireless Audio/ Mic Adapter.
Note：
The Wireless Audio receiver unit will automatically enter a power saving mode when no audio signal is received after five minutes. Please press the PWR button on the unit to turn the receiver back on.
