User Manual | English |
Installation and Operation
1.Insert the supplied FireWire cable in to the port on the back of the LINDY FireWire Repeater Hub.
2.Connect the other end of the FireWire cable to an available FireWire port on your computer.
3.You may also attach the supplied power supply, though this should only be required for use with FireWire peripherals with high power consumption.
No drivers are required to install the hub; however when you connect peripherals to your hub for the first time the Windows New Hardware Installation program will prompt you to install the software drivers for the peripheral. Follow the instructions in the User Manual that came with your peripheral to complete this process.
Specification
Specification | LINDY FireWire Repeater Hub 6 Port |
|
|
Chips | Texas Instruments |
|
|
| 100/200/400 Mbps |
|
|
LED | 1 |
|
|
Connector |
|
|
|
3
