8+1 Port 10Base-T/2 Ethernet Hub
User Manual | English |
|
|
LINDY No. 32969
© LINDY ELECTRONICS LIMITED &
Packing List
The package should contain the following items:
•The 8+1 Port Ethernet Hub
•One AC/AC Power Adapter
•This User’s Guide
If any of the items are missing or damaged, please contact your local dealer.
Introduction
With eight UTP ports and one BNC port located at the rear panel, this device allows you to network up to at least nine workstations in a standalone configuration. An uplink function is designed for connection to another hub to extend your segment, rather than a normal port for a workstation. For more details about Uplink function, refer to the following section.
Running at 10Mbps with great stability, this hub complies with IEEE802.3 standard.
Features
!IEEE 802.3 compliant (10Mbps, CSMA/CD)
!Provide one slide switch to select Port 1 to uplink mode or normal mode
!Provide one BNC port for connect to thin Ethernet ( 10Base2 )
!Port
!Data collision and jabber handling functions
!Two LEDs to indicate Power and Collision status
!Two year warranty
Specifications
!Standards: IEEE 802.3
!10Mbps Ports:
!Hub LEDs: Power, Collision
!Port LEDs: Link and Activity
!Dimension: 187x100x30mm / 8x4x1.2 inches
!Power: External power adapter, 7.5V, 0.5A
!Operating Temperature:
!Operating Humidity:
Physical Description
Front and Rear Panel
1.Power Indicator
This LED indicator is on when the hub is powered up.
2.Collision Indicator
This LED indicator blinks when the hub detects a collision on the network.
3.Link/Activity Indicator
These LEDs indicate the state of the data link. When the connection is okay, these LEDs remain on. Blinking indicates data is being received on the segment.
4.RJ-45 Ports
The hub is equipped with 8
5.BNC Port
Provide one BNC port for connect to thin Ethernet (10Base2)
6.Slide switch
Port1 is designed to provide normal or uplink function by slide switch. (See picture below)
7.AC Adapter Port
Insert the AC adapter jack into this port.