Lindy 42910 FCC Warning, Operation English, Anschluss & Betrieb Deutsch, Utilisation Francais

Models: 42910

1 2
Download 2 pages 26.25 Kb
Page 2
Image 2
OPERATION (ENGLISH)

OPERATION (ENGLISH)

POWER REQUIREMENT

Modern 2.5” HDDs with low power requirement may be operated even without the enclosed PS/2 power splitter cable. If operation of the HDD is erratric please use the enclosed PS/2 power splitter cable connected to the PS/2 port of your computer. For HDDs with higher power consumption (>500mA) it may be necessary to use an external power supply to power up the HDD in the external case properly. Please contact LINDY for an appropriate power adapter.

Driver Installation

Modern operating systems like Windows XP, 2000, ME already include the necessary drivers if your USB 2.0 Card is installed correctly and drivers are up to date. If the external HDD Drive is recognized correctly as a USB 2.0 device please do not install drivers again.

Please refer to the enclosed Software Installation Manual for installation in other situations.

ANSCHLUSS & BETRIEB (DEUTSCH)

STROMVERSORGUNG

Moderne 2,5“ Festplatten mit niedrigen Strombedarf können in den meisten Fällen ohne zusätzliches Stromversorgungskabel betrieben werden. Wenn die Festplatte jedoch nicht einwandfrei funktioniert oder eine hohen Strombedarf (>500mA) hat, sollte immer das beiliegende Stromversorgungs-Y-Adapterkabel verwendet werden. Sollte jedoch ein Notebook nicht in der Lage sein, die notwendige Versorgungsspannung über den USB- und PS/2-Port zur Verfügung zu stellen, so kann auch ein externes Netzteil verwendet werden, z.B. LINDY Artikelnummer 70224 ( Weitbereichsnetzteil 90-240V, mit Euro Stecker).

TREIBERINSTALLATION

Moderne Betriebssysteme wie Windows XP, ME, 2000 (mit installierter USB 2.0 Karte und aktuellen Treibern) haben bereits alle notwendigen Treiber an Board. Sollte das externe Laufwerk hier bereits als USB 2.0 Device erkannt werden und funktionieren, so sollte keine erneute Treiberinstallation vorgenommen werden. In allen anderen Fällen gehen Sie bitte vor wie im Software Installation Manual beschrieben.

UTILISATION (FRANCAIS)

PUISSANCE NECESSAIRE

Les disques durs 2.5” classiques avec une faible consommation d’énergie peuvent être utilisés sans le câble d’alimentation Y PS/2 fourni. Si le disque dur se comporte de manière étrange, veu illez utiliser ce câble.

Pour des disques durs consommant davantage de puissance (>500mA) il sera nécessaire de connecter une alimentation externe supplémentaire. Veuillez contacter LINDY pour les alimentations correspondantes. En général, les alimentations LINDY pouvant convenir sont les prises secteur spéciales pour l’Angleterre et l’alimentation 70224 pour le continent Européen à connexion Euro.

Installation du pilote

Les systèmes d’exploitation actuels comme Windows XP, 2000, ME incluent directement le pilote USB 2.0 et il sera mis à jour automatiquement. Si le disque dur externe est reconnu correctement en tant que périphérique USB 2.0 n’essayez pas de réinstaller le pilote.

Veuillez vous référer au m anuel fourni pour l’installation des pilotes sous d’autres systèmes.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

!Reorient or relocate the receiving antenna

!Increase the separation between the equipment and receiver

!Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

!Consult the dealer or an experienced radio/TV technician for help

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation

For Home and Office Use Tested to Comply

with FCC Standards

LINDY No. 42910

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - First Edition - MAR 2003

Page 2
Image 2
Lindy 42910 FCC Warning, Operation English, Anschluss & Betrieb Deutsch, Utilisation Francais, Power Requirement, LINDY No