Français, Italiano, English, Deutsch | Lindy 42937, 43137 instruction

5.25” CD/DVD/BD Drive Enclosure

Installation Guide	English
Installationsanleitung	Deutsch
Manuel Utilisateur	Français
Manuale d’uso	Italiano

No. 42937 USB 2.0/eSATA/FW400

No. 43137 USB 3.0

www.LINDY.com

For Home and Office Use

Tested to Comply with FCC Standards

Laufwerk an. Wenn Sie ein IDE/Atapi-Laufwerk verwenden, montieren Sie den SATA/IDE-Adapter und verwenden die entsprechenden internen Adapterkabel.

5.Positionieren Sie das Laufwerk im Gehäuse und schrauben Sie es mit den beiliegenden Schrauben seitlich fest.

6.Schieben Sie die obere Gehäusehälfte von hinten wieder auf und schrauben Sie die hintere Blenden mit den beiden Schrauben fest

7.Schließen Sie nun das Netzteil an. Die Verbindung zum Computer sollte immer nur mit einem Kabel erfolgen, entweder USB, eSATA oder FireWire!

Français

1.Retirez les deux vis de maintien, pour détacher le plateau arrière.

2.Glissez le couvercle du boîtier vers le fond.

3.Poussez avec précaution les coins de la façade vers l’intérieur du boîtier jusqu’à ce que l’ergot soit retiré.

4.Glissez votre lecteur CD/DVD par la façade du boîtier et connectez y les câbles d’alim et de données SATA. Si vous utilisez un lecteur IDE, installez d’abord un adaptateur SATA vers IDE et les câbles d’alimentation correspondants.

5.Positionnez le lecteur et fixez le avec les vis.

6.Replacez le couvercle et le plateau arrière, et remettez les 2 vis.

7.A présent, connectez l’alimentation puis le boîtier à votre ordinateur, avec un câble eSATA, FireWire ou USB.

Italiano

1.Rimuovere le due viti di fissaggio della staffa posteriore

2.Far scorrere la copertura superiore dal retro

3.Spingere con cautela gli angoli del frontalino verso l©interno dell’alloggiamento fino a quando il perno viene rimosso

4.Far scorrere il drive CD/DVD/BD e collegare i cavi SATA dati e alimentazione. Se utilizzate un drive IDE, installate prima l’adattatore SATA a IDE e il cavo di alimentazione interno corrispondente.

5.Posizionare il drive e fissarlo con le relative viti nello slot all’interno dell’alloggiamento

6.Montare di nuovo le varie parti dell’alloggiamento con le relative viti.

7.Collegare l’alimentazione e collegare l’alloggiamento al computer tramite cavo eSATA, FireWire o USB.

Specification

•Internal Connection: SATA I/II Data & Power

•External Connections: eSATA I/II 3Gbps, FireWire 400 & USB 2.0

(42937); USB 3.0 (43137); Maximum drive depth: 20cm

•Aluminium housing and 40mm Fan for heat dissipation and cooling

Package Contents

•5.25” CD/DVD/BD Drive Enclosure

•eSATA Cable & USB 2.0 A-B cable (42937)

•USB 3.0 A-B Cable (43137)

•External 100…240VAC PSU with country specific power cable

•Internal Power Adapter Cables SATA & IDE

•SATA to IDE/Atapi Adapter

Installation

English

1.Remove the two retaining screws to release the back plate.

2.Slide the top cover towards the back until it is free of the base.

3.Gently push the top corners of the front insert from inside the enclosure until the insert is removed.

4.Slide your CD/DVD/BD drive through the front of the enclosure and connect the SATA Data and Power cables to your drive. If using an IDE drive first install the SATA to IDE adapter and the corresponding internal adapter cables.

5.Position the drive as required and then fix the drive into position by applying screws through the enclosure’s mounting slots into your drive.

6.Replace the cover, back plate and retaining screws.

7.Now connect the power supply, and connect the enclosure to your computer, using either an eSATA, FireWire or USB cable.

Deutsch

1.Entfernen Sie die beiden Schrauben und die Blende an der Rückseite.

2.Schieben Sie die obere Gehäusehälfte nach hinten hinunter.

3.Drücken Sie zum Einbau des CD/DVD/BD-Laufwerkes die vordere Innen-Blende von innen vorsichtig nach außen heraus

4.Schieben Sie das CD/DVD/BD-Laufwerk von vorne in die Blende hinein und schließen Sie das SATA Power und Datenkabel am

Certifications

FCC Certifications

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.

CE Statement

This equipment complies with the relevant EC Regulations for IT Equipment

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment),

Recycling of Electronic Products

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. The Wheelie bin symbol shown indicates that this product must not be disposed of with household waste. Instead the product must be recycled in a manner that is environmentally friendly. For more information on how to dispose of this product, please contact your local recycling centre or your household waste disposal service. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products.

Germany / Deutschland

Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das Recycling von Elektro- und Elektronikprodukten geschaffen. Das ElektroG – Elektro- und Elektronikgerätegesetz verbietet das Entsorgen von entsprechenden, auch alten, Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernehmen die Gerätehersteller.

	LINDY No.42937, 43137
Tested to Comply with FCC Standards	www.lindy.com
For Home and Office Use

42937, 43137 specifications

Lindy 42937 and 43137 are two innovative products in the world of electronic connectivity solutions offered by Lindy, a renowned provider of high-quality AV, networking, and USB products. These devices are designed to meet a range of connectivity needs, catering to both commercial and personal applications.

One of the main features of Lindy 42937 is its ability to function as a USB 3.0 hub, providing multiple downstream ports that allow users to connect several USB devices simultaneously. This is particularly beneficial for users who require the connection of multiple peripherals such as printers, external hard drives, and other USB devices without compromising on performance. With USB 3.0 support, these products ensure high-speed data transfer rates of up to 5 Gbps, making them a powerful choice for data-intensive tasks.

Lindy 43137 complements the functionality of its counterpart by offering seamless compatibility with various operating systems. It supports Windows, macOS, and Linux, allowing for versatile usage in different environments. This cross-platform compatibility is crucial in today’s diversified computing landscape, as it enables users to connect devices regardless of their chosen operating system.

In terms of physical characteristics, both models come in a compact and sleek design, making them easy to transport and integrate into any workspace. They feature robust construction, ensuring durability and longevity, even in busy office settings. An additional highlight is their plug-and-play functionality, which eliminates the need for complex installation processes. Users can simply connect the devices to their computers, and they are ready to use.

Furthermore, Lindy has integrated advanced safety features to protect connected devices from power surges or voltage irregularities. This is essential for safeguarding valuable equipment and ensuring that users can rely on their hub for consistent performance.

In summary, Lindy 42937 and 43137 exemplify cutting-edge technology in USB connectivity, featuring multiple ports for device connections, high-speed data transfer, cross-platform support, robust construction, and advanced safety measures. These products are an ideal solution for anyone looking to streamline their connectivity setup, whether in a home office or a professional environment. Their combination of functionality, design, and user-friendly features sets them apart in the market, making them a reliable choice for users seeking an efficient and durable connection solution.

Lindy 42937, 43137 manual Français, Italiano, English, Deutsch

Models: 42937 43137