USB 3.0 (NEC chipset) 5Gbps 2Ports PCI Card
1. Introduction
USB 3.0 SuperSpeed 5Gbps Host Adapter to support all kind of 1.5Mbps, 12Mbps, 480Mbps and 3Gbps USB Devices!
1.1. Features
oCompliant with Universal Serial Bus 3.0 Specification Revision 1.0
oCompliant with Intel eXtensible Host Controller Interface (xHCI) Specification 0.95
oTwo USB 3.0 Type A downstream connectors on board
oAll USB ports can handle SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
oSupports any USB3.0, USB2.0 and USB1.1 devices
oCompliant with PCI Express Specification 2.0 or PCI Specification 3.0
o64bit and 32bit Windows 7, Vista, XP drivers support
oChipset : NEC
1.2.Power Jack Spec
oPower Input : 5.25” Internal Power Adapter
1.3.Package Contents
Host Adapter
Users Manual
Driver CD
2. Windows 7/Vista/XP Driver Installation
1.Insert various USB 3.0 host adapter into an available PCIe or PCI or ExpressCard slot.
2.If PCIe card, connect power cable from PC Power supply to PCIe card power connector.
******Note: Make sure the power is well connected, otherwise your will see “Power
Surge on Hub Port” message and no 5V bus power in U SB ports.
3.Windows will display the 'Found New Hardware Wizard'.
4.Skip the driver installation
5.Run installer setup.exe on Driver CD E:\ USB3.0 Host\NEC to have the latest driver for 32bit /64bit Windows.
-2 -
