Lindy 70586 manual Description, Irq

u

Description

The 70586 32Bit PCI bus Plug & Play 2S/1P I/O card is equipped with two High-Speed RS-232.V24 Standard Serial Interfaces and one ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. The serial ports include 32 Byte FIFO with a speed up to 921Kb/Sec. 70586 has two 9 pin male connectors for attaching peripherals´ units with Serial RS-232 Standard Interface and one 25 pin female connector for peripherals' units withEEEI 1284 CENTRONICS Parallel Interface.

u

Hardware Specification

Serial Port:

UART Chipset: SUN1889, Hardware FIFO is 32Byte FIFO

Compatible chips: with 16C650, 16C550, and 16C450.

IEEE standard: RS-232 Interface

Driver Chipset: TI-75232, speed up to 100Kb/Sec, length 300-500M.

Max. Speed: Up to 921Kb/Sec (HYPER Terminal program)

Parallel Port:

Parallel Chipset: SUN1689, Hardware FIFO is 32Byte FIFO

Compatible chips: with ACC3203, ST-78C36, and HT6535.

IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface

Max. Speed: Up to 2MB/Sec

u

￿Hardware Installation

Turn off the power of your computer

( Plug the 70586 Serial adapter into the PCI bus of your computer

( Connect the peripheral Printer, Modem, Scanner… etc.) to this adapter ( Turn on the power of your computer

PCI device listing display (for example… )
Bus No		Device No		Func No		Vendor ID		Device ID	Device Class		IRQ
0	7		1		8086		7010		IDE Controller	14
0	13		0		1409		7168		Simple COMM.	10
									Controller

ž PAGE − 2