the operating system boots, click on the Start button located at the bottom left hand corner of the Desktop, select Settings and then Control Panel. Find and click on the SCSI Adapters. Click Drivers and Add.
The next window is asking for the location of the driver to be installed. Since the driver is on the provided floppy disk, insert the floppy in the floppy disk drive and click Have Disk.
The next window is asking for the location of the driver. Most floppy disk drives are configured as [A:]. To verify, click on Browse.
The next window verifies that the appropriate file is located on [A:]. Select the file sil680r and click Open. [A:] should appear in the window. Click OK.
The next window allows you to select which driver to install. Only one driver should appear in this window. Select Silion Image Sil 0680
To install the Medley GUI, use Windows InstallShield by performing the following:
1.After computer restarts, insert floppy disk in floppy disk drive.
2.
3.
4.
5.Follow
Windows 98/Me Operating System
With the board newly installed, as Windows 98/Me boots, the New Device will be detected and the Add New Hardware Wizard window will appear. Follow the instructions in each window, using the driver installation files (PnP680r.mpd or PnP649r.mpd) on the provided floppy disk as necessary.
1.Select specify the location of the driver [Advanced] click next.
2.Select search for the best driver for your device [Recommend]. Specify a location. Insert floppy disk into the floppy disk drive and click Browse.
3.Choose A: click ok and then next.
4.Click next and then Finish.
To install the Medley GUI, use Windows InstallShield by performing the following:
- 6 -
