Lindy CAT5 Technical Data and Radio Frequency Statement

Technical Data and Radio Frequency Statement

Measurements:

Local and Remote Unit: 16.5 x 9 x 2.6cm (WxDxH )

Weight, approx: 380g (each unit), 1.5kg total

Operating temperature: 0 … 40 degrees C (32 … 104 F)

Storage temperature: -20 … 60 degrees C (-4 … 140 F)

Humidity: 0 … 80 RH, non condensing

For indoor use only, in a dry environment with non-condensing vapour.

Power supplies: 9V AC, 500mA, 2.5 (5.5) mm connector

CE remark

This equipment has been tested and found to comply with the limits for Information Technology

Equipment of the European Community.

FCC remark

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed

and used in accordance with the instruction manual, may cause interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

 Reorient or relocate the receiving antenna

 Increase the separation between the equipment and receiver

 Connect the equipment into an outlet on a circuit different from that which the receiver is

connected

 Consult the dealer or an experienced radio/television technician for help.

Tested to comply with FCC Standards