Radio Frequency Energy Certifications
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
FCC Compliance Statement (United States)
This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area may cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. If this equipment causes interference, what can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
a)Reorient or relocate the receiving antenna.
b)Increase the separation between the equipment and receiver.
c)Connect the equipmment to an outlet on a circuit different from that to which the receiver is connected.
d)Consult the dealer or an experienced radi/TV technician
FCC WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC Rules.
Canadian Department of Communications RFI statement
This equipment does not exceed the class B limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada
European EMC Directive 89/336/EEC
CE statement
This equipment complies with the requirement for CE mentioned in the European Directive 89/336/EC and Standards EN55022 and EN55024.
© LINDY ELECTRONICS LIMITED &
