DESCRIPTION

PROGRAM TRANSMITTER INTO RECEIVER

 

Linear’s MegaCode® series of digital transmitters are wireless

Refer to the instructions provided with the receiver to program

 

radio controls designed for use with MegaCode format receivers. the transmitter into the receiver’s memory. With the receiver in

 

The MegaCode radio format provides unparalleled security. Each

a programming mode, press the desired transmitter button to

ACT-31B/34B

transmitter is pre-set at the factory to one of over 1,000,000

program that button into the receiver.

 

codes.

 

 

 

MINIATURE

The ACT-31B is a single-button transmitter that sends a unique

 

 

code to a single device. The ACT-34B is a four-button miniature

 

 

DIGITAL

transmitter that sends a unique code for each button. Typically, one

 

 

TRANSMITTERS

button is used to operate a community access gate, another button

 

 

can activate an individual’s garage door, the other two buttons can

 

 

Operation

activate additional automatic doors or other devices.

 

 

The transmitters are powered by two Type 2016 “coin cell” batteries.

Linear’s receivers that accept “Block Coding” can be programmed

Instructions

A 2-part key ring is supplied with the units.

to accept a user defined block of ID codes. These transmitters are

 

 

 

block coded. Each block of transmitters is labeled with starting and

 

 

 

ending block code numbers, along with an optional facility code

 

 

 

number. Refer to the instructions for details on how to program the

(760) 438-7000 • FAX (760) 438-7043

 

 

block and facility code numbers.

 

 

 

 

 

USA & Canada (800) 421-1587 & (800) 392-0123

 

 

 

 

Toll Free FAX (800) 468-1340

 

 

 

 

www.linearcorp.com

 

 

 

 

 

REPLACING BATTERY

 

LINEAR LIMITED WARRANTY

 

 

 

 

This Linear product is warranted against defects in material and workmanship for twelve (12) months. The

1 TWIST A COIN IN SLOT TO

2 REMOVE THE BACK OF THE CASE

3 REMOVE THE TWO

Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers

who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this

OPEN TRANSMITTER CASE

 

BATTERIES

product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s

 

 

 

warranty, if any. There are no obligations or liabilities on the part of Linear Corporation for consequential

 

 

 

damages arising out of or in connection with use or performance of this product or other indirect damages

 

 

 

with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied

 

 

 

warranties, including implied warranties for merchantability and implied warranties for fitness, are valid only

 

 

 

until Warranty Expiration Date as labeled on the product. This Linear Corporation Warranty is in lieu of all

 

 

 

other warranties express or implied.

 

 

 

 

All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact

 

 

 

Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.

 

 

 

DISCARD BATTERIES

IMPORTANT !!!

 

 

 

PROPERLY

Linear radio controls provide a reliable communications link and fill an important need in portable wireless

 

 

 

signaling. However, there are some limitations which must be observed.

 

4

 

5

• For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15

 

devices. As such, they have limited transmitter power and therefore limited range.

 

 

• A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio

 

 

 

SLIDE IN TWO NEW

 

 

signals that occur on or near their operating frequencies, regardless of code settings.

 

 

SNAP CASE

• Changes or modifications to the device may void FCC compliance.

 

TYPE 2016 BATTERIES

 

 

 

TOGETHER

• Infrequently used radio links should be tested regularly to protect against undetected interference or

 

 

fault.

 

 

 

 

 

BE SURE BOTH PLUS (+)

 

 

• A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor

SIDES ARE FACING AWAY

 

 

or dealer, and these facts should be communicated to the ultimate users.

 

 

 

• This device complies with FCC Part 15 and Industry Canada Rules and Regulations. Operation is subject to the

FROM THE CIRCUIT BOARD

 

 

 

 

following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

 

 

 

interference received, including interference that may cause undesired operation.

 

 

 

 

Copyright © 2000 Linear Corporation

217397 A

Page 1
Image 1
Linear ACT-31B/34B warranty Miniature, Digital, Transmitters, Operation, Instructions

ACT-31B/34B specifications

The Linear ACT-31B/34B series represents a significant advancement in remote control technology, designed to provide users with enhanced performance, reliability, and convenience. Aimed primarily at the residential and commercial markets, these devices emphasize user-friendly features that cater to a variety of control needs.

One of the standout features of the ACT-31B/34B is its multi-channel capability. This allows users to control multiple devices from a single remote, streamlining operations and improving efficiency. The ACT-31B, for example, can manage up to three different devices, while the ACT-34B expands on this with four channels, making it suitable for users with more complex system setups.

The technology underpinning these devices is state-of-the-art, featuring a robust radio frequency (RF) communication system. This ensures a reliable connection over considerable distances, typically up to 1000 feet, which is advantageous in larger homes or commercial spaces. The devices operate on a frequency that minimizes interference, enhancing the overall responsiveness and stability of the control signal.

Another remarkable characteristic of the Linear ACT-31B/34B series is their ease of integration. They employ a user-friendly setup process, allowing for quick installation with minimal technical expertise required. This is particularly beneficial for customers who prefer a plug-and-play experience. Moreover, the devices are compatible with a wide range of home automation systems, making them versatile options for those looking to enhance their existing setups.

Security is a top priority in the design of the ACT-31B/34B. They feature rolling code technology, which generates a new code for each transmission. This significantly reduces the risk of unauthorized access, ensuring that users can operate their devices with peace of mind.

User convenience is further enhanced by the ergonomic design of the remotes. The layout is intuitive, allowing users to easily navigate and operate the various functions without confusion. Additionally, the remotes are equipped with LED indicators, providing clear feedback on operation status.

In summary, the Linear ACT-31B/34B series represents a compelling choice for users seeking advanced remote control functionality. With their multi-channel capabilities, robust RF technology, seamless integration, enhanced security features, and user-friendly design, these devices are positioned to meet the demands of modern control environments. Whether for residential use or commercial applications, the ACT-31B/34B series offers reliability and convenience that can significantly enhance device management.