Linear CCM-2A installation instructions Color, Camera, Module, Installation Instructions

Models: CCM-2A

1 1
Download 1 pages 23.28 Kb
Page 1
Image 1
CCM-2A

CCM-2A

PRODUCT DESCRIPTION

1. REMOVE THE COVER PLATE

Linear’s Model CCM-2A (P/N ACP00936A) CCTV camera can be installed inside the

 

 

RE-2 Residential Telephone Entry System. The camera provides a video signal for

 

 

viewing the area in front of the entry system.

 

Color

The camera is continuously powered by the RE-2. Focus has been factory adjusted to

REMOVE THE FOUR

a range of three to four feet. No adjustment is needed.

SECURITY SCREWS

Camera

TO OPEN THE CASE

The CAMERA connector is used to connect the camera to the RE-2. The 3-conductor

 

Module

cable routes power to, and video from the camera.

 

The RE-2 provides a video jack for connection to a video cable with a Type “BNC”

 

 

connector. Up to 400 feet of 75-ohm RG-59 video cable can be used. Longer cable

 

 

runs may require the use of a video amplifi er.

 

Installation Instructions

NOTE: If camera is being installed on an existing installation, system power should be off prior to installing the camera.

USA & Canada (800) 421-1587 & (800) 392-0123

(760)438-7000 - Toll Free FAX (800) 468-1340 www.linearcorp.com

2. PREPARE TO MOUNT THE CAMERA
3. REMOVE THE LENS CAP
4. INSTALL THE CAMERA

 

 

REMOVE THE SIX CIRCUIT

REMOVE THE LENS CAP

 

 

 

FROM THE CAMERA LENS

 

 

 

BOARD RETAINING SCREWS

 

 

 

AND FLIP THE CIRCUIT BOARD UP

 

 

 

 

REMOVE THE TWO RETAINING

 

 

 

 

SCREWS AND BRACKETS

 

 

 

CAMERA

 

 

 

 

MOUNTING

 

 

 

 

AREA

 

 

 

 

 

REMOVE THE

 

 

SECURE THE CAMERA

 

BLACK DOT

 

PLASTIC

WITH THE TWO RETAINING

 

ON CAMERA

 

CAMERA

BRACKETS AND SCREWS

 

GASKET

 

 

 

 

GASKET

 

 

 

 

 

5. CONNECT THE CAMERA AND VIDEO CABLE
6. TEST CAMERA
LINEAR LIMITED WARRANTY

 

 

CONNECT THE VIDEO CABLE FROM

APPLY POWER TO THE ACCESS SYSTEM

This Linear product is warranted against defects in material and workmanship for twenty four

 

(24) months. The Warranty Expiration Date is labeled on the product. This warranty extends

CONNECT THE CAMERA'S

THE MONITOR OR MODULATOR TO

THEN VIEW THE VIDEO MONITOR TO TEST

only to wholesale customers who buy direct from Linear or through Linear’s normal distribution

THE RE-2'S VIDEO OUTPUT CONNECTOR

THE VIDEO OUTPUT FROM THE CAMERA

channels. Linear does not warrant this product to consumers. Consumers should inquire from

CABLE TO THE RE-2'S

 

 

 

their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or

CAMERA CONNECTOR

 

 

liabilities on the part of Linear Corporation for consequential damages arising out of or in

 

 

 

connection with use or performance of this product or other indirect damages with respect

 

 

 

to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation.

 

 

 

All implied warranties, including implied warranties for merchantability and implied warranties

 

 

 

for fi tness, are valid only until Warranty Expiration Date as labeled on the product. This Linear

 

 

 

Corporation Warranty is in lieu of all other warranties express or implied.

 

 

 

All products returned for warranty service require a Return Product Authorization Number (RPA#).

 

 

 

Contact Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.

CAMERA

 

 

FCC NOTICE: This device complies with FCC Rules Part 15. Operation is subject to the following

VIDEO

 

two conditions: (1) This device may not cause harmful interference, and (2) This device must

CONNECTOR

 

 

accept any interference received, including interference that may cause undesired operation.

 

OUTPUT

 

 

 

 

 

 

CONNECTOR

 

 

 

 

 

 

Copyright © 2009 Linear LLC

229333 A

Page 1
Image 1
Linear CCM-2A installation instructions Color, Module, Installation Instructions, Product Description, Test Camera