Linear COMP-DA-1X8 user manual Application Diagram, Maximum 512 Displays

CONNECTING AND OPERATING THE 1x8 COMPONENT / AUDIO DA

How to Connect the 1x8 Component / Audio DA to your devices

1Connect the supplied component cable from the HDTV source into the 1X8

Component / Audio DA’s input port.

2Connect either a SPDIF digital audio or RCA analog right and left audio cable into the 1X8 Component / Audio DA’s audio input port.

3Connect the component and audio cables from your display(s) (up to 8) into the component and audio out slots on the 1X8 Component / Audio DA.

5Plug the 5V DC power supply into the 1X8 Component / Audio DA.

6Plug the 5V DC wall mount power supply into the wall outlet.

NOTE: Both analog and digital audio outputs are active on all of the outputs. Also, Composite video can also be fed into the Component video input to split and distribute Composite video.

Application Diagram

Multiple COMP-DA-1X8 devices can be daisy chained together to distribute a single Component signal to 73 units maximum, for a total of 512 displays.

COMP-DA-1X8

COMP-DA-1X8

X8

COMP-DA-1X8

X64

Maximum 512 Displays

Maximum recommended distance of component cabling between each COMP-DA- 1X8 or display (1080p) is 50 ft. Maximum number of displays that are supported in a large 1x8 Component / Audio DA system is 512.

4