Linear DXS-64 warranty Transmitter lights when the unit is activated, Programming

DXS-64	PRODUCT DESCRIPTION	FEATURES
	The Model DXS-64 is a battery powered, miniature, water-resistant*, supervised
	transmitter designed for use in emergency applications with Linear’s DX and DXS
BY	format receivers. The transmitter is supplied with a nylon pendant necklace with a
	breakaway feature for added safety. Pressing the button on the transmitter sends	SNAP
	a digital coded wireless signal to its companion receiver. To insure sending
		CORD
	a complete signal, press the transmitter button for a minimum	RELEASE
SUPERVISED
	of two seconds.
	The DXS-64 transmitter is factory set to a unique code, so no fi eld coding is	NYLON
EMERGENCY
	required. The DXS-64 sends a signal when its button is pressed. The transmitter	CORD
		NECK
TRANSMITTER	can send a signal for up to 30 seconds per activation. The red signal indicator on
	the transmitter lights when the unit is activated.
	If status transmissions are enabled, they will be sent every two hours. Some
Operation	receivers are able to use these signals, others are not.	SIGNAL
	Every two hours the transmitter tests for a low battery. This test takes place even if	CORD
		INDICATOR
Instructions	status transmissions have not been enabled. If the battery tests low, a low battery	LENGTH
	signal is sent and the transmitter LED fl ashes.	ADJUSTMENT
	Receivers must be programmed to the transmitter’s code before system testing
	and operation. Refer to the receiver’s instructions for details on operation and	ACTIVATION
	programming.	BUTTON
(760) 438-7000	Each transmitter is sealed to provide water-resistance. The unit’s battery is not
USA & Canada (800) 421-1587 & (800) 392-0123	replaceable. The transmitter should be discarded at the end of its battery life.
Toll Free FAX (800) 468-1340	* NOTE: Water resistance not tested by UL
www.linearcorp.com
STATUS OPTION & PROGRAMMING	SYSTEM TESTING	LINEAR LIMITED WARRANTY
		This Linear product is warranted against defects in material and workmanship for twenty-four (24) months.
IF THE TWO HOUR STATUS TIMER IS DESIRED FOR SUPERVISION,	IMPORTANT! TEST SYSTEM WEEKLY	The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale
	THE MANUFACTURER STRONGLY RECOMMENDS THAT YOU	customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not
PERMANENTLY ENABLE THE TIMER BY PRESSING THE TRANSMITTER		warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature
BUTTON FIVE TIMES IN SUCCESSION WITHIN 3 TO 4 SECONDS.	TEST SECURITY EQUIPMENT FREQUENTLY. OVER A PERIOD OF
		of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear LLC for
	TIME, NO ELECTRONIC PRODUCT IS BETTER THAN THE
		consequential damages arising out of or in connection with use or performance of this product
	INSPECTION AND MAINTENANCE IT RECEIVES. THEREFORE,
		or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal,
	FROM THE TIME OF INSTALLATION, IT IS ABSOLUTELY
		installation, or reinstallation. All implied warranties, including implied warranties for merchantability and
	NECESSARY TO TEST THE SYSTEM AT LEAST ONCE A WEEK.
		implied warranties for fi tness, are valid only until Warranty Expiration Date as labeled on the product. This
	PLACE THE RECEIVER IN "TEST" MODE	Linear LLC Warranty is in lieu of all other warranties express or implied.
		All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact
	AND ACTIVATE THE TRANSMITTER.	Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.
	VERIFY THAT THE SIGNAL IS RECEIVED
		IMPORTANT !!!
	AND THAT THE SYSTEMS REPORTS AS
	REQUIRED.	Linear radio controls provide a reliable communications link and fi ll an important need in portable wireless
		signaling. However, there are some limitations which must be observed.
		 For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as
		Part 15 devices. As such, they have limited transmitter power and therefore limited range.
		 A receiver cannot respond to more than one transmitted signal at a time and may be blocked by
		radio signals that occur on or near their operating frequencies, regardless of code settings.
		 Changes or modifi cations to the device may void FCC compliance.
		 Infrequently used radio links should be tested regularly to protect against undetected interference or
		fault.
		 A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale
PROGRAM THE TRANSMITTER INTO THE RECEIVER BY PLACING THE		distributor or dealer, and these facts should be communicated to the ultimate users.
		This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the
RECEIVER INTO PROGRAM MODE. THEN SEND A SIGNAL TO THE RECEIVER
		following two conditions: (1) This device may not cause harmful interference and (2) this device must
FROM THE TRANSMITTER. REFER TO THE RECEIVERS PROGRAMMING
		accept any interference received, including interference that may cause undesired operation.
INSTRUCTIONS FOR DETAILS.
		Copyright © 2005 Linear LLC	224801 A