Linear DXS-LRW warranty Supervised, Long Range, Wristwatch, Transmitter

DXS-LRW	PRODUCT DESCRIPTION		FEATURES
	The Model DXS-LRW is a battery powered, miniature, water-resistant*,		THE TRANSMITTER IS DESIGNED
	supervised transmitter designed for use in emergency applications with Linear’s		TO BE WORN ON THE WRIST
BY	DX and DXS format receivers. The transmitter is supplied with a soft, adjustable,		AND ACTIVATED BY PRESSING
	silicone wristband. Pressing the button on the transmitter sends a digitally coded		THE BUTTON WITH THE OTHER HAND
SUPERVISED	wireless signal to its companion receiver. To insure sending a complete signal,		THE WRISTBAND CAN BE
	press the transmitter button for a minimum of two seconds.
LONG RANGE	The DXS-LRW transmitter is factory set to a unique code, so no field coding		CUT OFF AT THE SLOT FOR
			SMALLER WRISTS
“WRISTWATCH”	is required. The DXS-LRW sends a signal when its button is pressed. The
	transmitter can send a signal for up to 30 seconds per activation. The signal
TRANSMITTER	indicator on the transmitter lights green when the unit is activated. Receivers
	must be programmed to the transmitter’s code before system testing and
	operation. Refer to the receiver’s instructions for details on programming.		SILICONE
Operation	If status transmissions are enabled, the transmitter will send a status signal every		WRISTBAND
	two hours. Some receivers are able to monitor status signals, others are not.		2-COLOR
Instructions	Every two hours the transmitter tests for a low battery. This test takes place even
			SIGNAL
	if status transmissions have not been enabled. If the battery tests low, a low		INDICATOR
	battery signal is sent. If the transmitter is activated with a low battery, the signal
			GREEN = BATTERY OK
	indicator will light red.
	Each transmitter is sealed to provide water-resistance. The unit’s battery is not		RED = BATTERY LOW
USA & Canada (800) 421-1587 & (800) 392-0123
	replaceable. The transmitter should be discarded at the end of its battery life.		ACTIVATION	ADJUSTABLE
(760) 438-7000 - Toll Free FAX (800) 468-1340	* NOTE: Water resistance not tested by UL
www.linearcorp.com			BUTTON	CLASP
STATUS OPTION & PROGRAMMING	SYSTEM TESTING		LINEAR LIMITED WARRANTY
IF THE TWO HOUR STATUS TIMER IS DESIRED FOR SUPERVISION,	IMPORTANT !	TEST SYSTEM WEEKLY !	This Linear product is warranted against defects in material and workmanship for twenty-four (24) months.
			This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s
PERMANENTLY ENABLE THE TIMER BY PRESSING THE TRANSMITTER	THE MANUFACTURER STRONGLY RECOMMENDS THAT YOU TEST
			normal distribution channels. Linear does not warrant this product to consumers. Consumers should
BUTTON FIVE TIMES IN SUCCESSION WITHIN 3 TO 4 SECONDS. WHEN	EMERGENCY EQUIPMENT FREQUENTLY. OVER A PERIOD OF TIME, NO		inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations
STATUS REPORTING IS TURNED ON, THE LED SIGNAL INDICATOR WILL	ELECTRONIC PRODUCT IS BETTER THAN THE INSPECTION AND		or liabilities on the part of Linear LLC for consequential damages arising out of or in connection
BLINK 3 TIMES AFTER ACTIVATION.	MAINTENANCE IT RECEIVES.	THEREFORE, FROM THE TIME OF	with use or performance of this product or other indirect damages with respect to loss of property,
	INSTALLATION, IT IS ABSOLUTELY NECESSARY TO TEST THE SYSTEM AT		revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including
			implied warranties for merchantability and implied warranties for fitness, are valid only until the warranty
	LEAST ONCE A WEEK.
			expires. This Linear LLC Warranty is in lieu of all other warranties express or implied.
			All products returned for warranty service require a Return Product Authorization Number (RPA#).
	PLACE THE RECEIVER IN "TEST"		Contact Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.
			IMPORTANT !!!
	MODE AND ACTIVATE THE
	TRANSMITTER. VERIFY THAT THE		Linear radio controls provide a reliable communications link and fill an important need in portable wireless
	SIGNAL WAS RECEIVED AND THAT		signaling. However, there are some limitations which must be observed.
	THE SYSTEM REPORTS AS		 For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as
	REQUIRED.		Part 15 devices. As such, they have limited transmitter power and therefore limited range.
INSTRUCTIONS FOR			 A receiver cannot respond to more than one transmitted signal at a time and may be blocked by
THE INSTALLER	IF THE SIGNAL INDICATOR BLINKS		radio signals that occur on or near their operating frequencies, regardless of code settings.
			 Changes or modifications to the device may void FCC compliance.
	RED-GREEN 3 TIMES AT THE END OF AN		 Infrequently used radio links should be tested regularly to protect against undetected interference
	ACTIVATION, THE BATTERY IS GETTING IF THE SIGNAL INDICATOR LIGHTS		or fault.
PROGRAM THE TRANSMITTER INTO THE RECEIVER BY PLACING			 A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale
	NEAR ITS LOW BATTERY LEVEL. NO	RED WHILE THE BUTTON IS PRESSED,	distributor or dealer, and these facts should be communicated to the ultimate users.
THE RECEIVER INTO PROGRAM MODE, THEN SEND A SIGNAL TO	LOW BATTERY SIGNAL IS SENT IN
		THE BATTERY IS LOW AND	This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the
THE RECEIVER FROM THE TRANSMITTER. REFER TO THE UL LISTED	THIS CONDITION.		following two conditions: (1) This device may not cause harmful interference and (2) this device must
		THE DXS-LRW TRANSMITTER
PERS-2400B OR PERS-3600B RECEIVER'S PROGRAMMING
			accept any interference received, including interference that may cause undesired operation.
		NEEDS TO BE REPLACED
INSTRUCTIONS FOR DETAILS.			Copyright © 2011 Linear LLC	230860 C