CONTENTS
CONTROL AREA FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 REAR SIDE AND BOTTOM FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 TELEPHONE CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 BACKUP BATTERY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 TRANSFORMER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 APPLY POWER - SELECT DIALING METHOD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 TRANSMITTER INSTALLATION OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLING SINGLE TRANSMITTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLING MULTIPLE TRANSMITTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TESTING TRANSMITTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ERASING TRANSMITTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 RECORDING REMINDER MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LOCAL PROGRAMMING WITH
PRODUCT DESCRIPTION
The
The Console can receive signals from up to 16 Linear wireless transmitters. Activating a transmitter causes the Console’s digital communicator to send the appropriate alarm report to the central monitoring station via the standard telephone network. In addition to the central station report, audible and visual indications occur and the alarm relay energizes during an emergency activation. The emergency alarm can be triggered by the large HELP button on the top of the Console or with a wireless transmitter. The fi re alarm can be triggered by a wireless smoke alarm.
ACTIVITY TIMER
The optional activity timer can be set for 8, 12 or 24 hour operation or disabled. The emergency alarm will trigger automatically if the time set elapses before an activity transmitter is triggered or the Console’s HOME button is pressed.
VOICE PROMPTS
To simplify operation, the Console can “speak” to the subscriber with its
AUDIO COMMUNICATIONS
The Console can perform
REMINDER MESSAGES
DIGITAL COMMUNICATOR
The Console’s digital communicator can route calls to three telephone numbers: primary, secondary, and supervisory. General reporting codes and individual sensor reporting codes are programmable for the 4x2 format. Alternately, Ademco Contact ID format can be selected. The telephone line is constantly monitored, line failure and restoral will be locally announced by the Console (optional through programming).
POWER SUPPLY
Powered by a low voltage
PROGRAMMING
The Console is programmed using the
OPERATION SUMMARY
A variety of Linear’s supervised DXS and
EMERGENCY
Portable, supervised and
FIRE
Supervised Model
fire alarm is activated, the Console announces the fi re alarm and a fi re report is sent to the central station.
CARBON MONOXIDE (CO)
Supervised Model
ACTIVITY
Supervised, switch or motion triggered transmitters (Models
AUTOMATIC FULL SYSTEM TEST
The Console can be programmed to perform a full system test daily, weekly, or monthly. The automatic full system test can also be disabled. As long as all system components are operational, the system test report will be sent at the programmed interval. The full system test report will NOT be sent if any system component (transmitter, Console, phone line) is not fully functional.
As a special feature, the
The Console can be programmed to act as a remote controlled “speakerphone”. With the speakerphone mode enabled, the Console will monitor the telephone line for an incoming call. Activating any emergency transmitter (or the Console’s HELP button) while the telephone is ringing will cause the Console to seize the line and begin speakerphone communications. Activating any emergency transmitter (or HELP button) during the call will disconnect the line. The Console will
TRANSMITTER SUPERVISION
Supervised transmitters regularly send status reports to the Console and low battery reports when their batteries are low. When the Console receives a low battery report, the STATUS indicator blinks. If the Console fails to receive a status report from a transmitter for a period of 24 hours, the STATUS indicator will light. All supervisory conditions can sound a local annunciation and be reported to the central station (optional through programming).
EMERGENCY
NOTE: COMPATABILITY WITH THE
NOTE: NOT A UL LISTED DEVICE
FIRE | CARBON |
| MONOXIDE |
ACTIVITY
UP TO 16 TRANSMITTERS TOTAL CAN BE USED WITH EACH CONSOLE