Link electronic 1199 manual Link ELECTRONICS, INC, Features

LINK ELECTRONICS, INC.

SDI SMPTE COLOR BAR GENERATOR

WITH GEN-LOCK

	MODEL 1199
FEATURES	Gen-lock
10 Bit Processing	H. Timing
SDI SMPTE Color Bars	V. Timing
NTSC or PAL	Rotary Encoder
Two Black Burst Output	RS-189A
Two SMPTE Color Bar Output	7-Segment LED Readout
RS-170A Spec	Use As Stand-alone

The LINK 1199 is another family of modules for the DigiFlex 1000 series. The unit automatically selects between NTSC or PAL in the Gen-lock mode. The 1199 defaults to NTSC in the free run mode. For PAL operation, an external PAL black burst signal must be attached to the EXT REF input on the rear I/O. The1199 takes advantage of the latest FPGA technology to provide the highest performance for a SMPTE color bar generator. There are two outputs each of SDI SMPTE color bars and the two outputs each of SDI black. The timing range is infinite for each output set i.e. Black and color bars.

There is a front card edge LED for displaying the function under adjustment. Two push-buttons switches are used for “Select” and “Enter”. The front card edge LED displays H and V timing numbers for audit and confirmation.

The 1199 SDI SMPTE Color Bar generator specifically designed for use in 601 SDI digital applications in both 525/60 and 625/50 systems. A high stability VCXO provides the necessary accuracy for the most demanding requirements.

An infinite Gen-lock timing range makes the 1199 ideal for timing the signal into the studio facility. The two outputs of the 1199, color bar and black burst outputs are adjustable over the entire H and V infinite timing range. For total flexibility, the 1000 frame will hold up to ten 1199 models, this makes timing of SDI color bar and black an easy task. Each of the 1199’s in a frame may select either color bars or black burst. Each module may be used to time source video’s in a system, by using the black burst output.

The 1199 is ideal for use as either a master or slave generator in any system, making Link Electronics the only choice for a digital timing system to meet both your needs and your budget.

The 1199 receives a reference black burst for timing purposes in the Gen-lock mode, or as a stand-alone without a reference input in the free-running mode. The unit will operate in the 7200 single module chassis for remote field operation. The 1000 frame holds up to ten modules with dual power supplies of any mix of the 1000 series modules. At present there are 35 module choices for system integration.

LINK ELECTRONICS, INC.	2137 Rust Avenue	Cape Girardeau, MO 63703-7668
	Phone 573 334 4433	FAX 573 334 9255