Link electronic DigiFlex 1152 warranty Features, Mounting Frame Options, Link Electronics, Inc

1000 SERIES DIGIFLEX

LINK ELECTRONICS, INC.

ANALOG VIDEO DISTRIBUTION AMPLIFIER 1 X 8

DigiFlex 1152

MADE IN THE USA

FEATURES

‹Eight Outputs

‹Differential Input

‹DC or AC Coupled

‹Op Amp. Technology

‹±3dB Gain, each set of four

‹100 MHZ Bandwidth

‹Diff. Gain and Phase 0.1

The DigiFlex 1152 Video DA represents the state of the art in analog video distribution. The 1152 provides high-performance video distribution in the LINK DigiFlex 1000 Frame. The advantage is obvious: both analog and digital distribution amplifiers can operate side-by-side in a single frame!

Utilizing the latest CMF Op-Amp technology, the 1152 combines wide bandwidth, low noise, and low power consumption. The video path is truly transparent, with differential phase and gain errors of <0.1° and <0.1%, respectively. Video signal-to- noise ratio exceeds 65dB.

Mounting Frame Options

1000 - Single Power Supply, Holds 11 Modules 1000/2 - Dual Power Supply, Holds 10 Modules 7200 - Mounting Frame, Holds 1 Module

DC-coupled differential input is a standard feature, providing high common-mode rejection. Eight outputs are available on the companion rear cell, model 1011. The front panel gain control adjusts the level to ±3dB.

The attention to detail in the design of the 1152 extends to the power supply, which features a simple switching regulator. While slightly more complex than a linear supply, this offers the highest possible efficiency. Backed by a ten-year warranty including parts and labor. The 1152 will provide years of trouble-free service.

LINK ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668

Phone 573 334 4433 ‹ FAX 573 334 9255