Link electronic DigiFlex 1159 manual Link ELECTRONICS, INC, Features

1000 SERIES DIGIFLEX

LINK ELECTRONICS, INC.

SDI TO ANALOG COMPOSITE & Y/C

DigiFlex 1159

MADE IN THE USA

FEATURES

‹10 Bit Processing

‹SDI Serial Component Digital Input

‹NTSC or PAL Input

‹Two NTSC/PAL Outputs

‹One Y/C (S-Video) Output

‹Composite Sync Output

The LINK 1159 converts SDI serial component digital, 10 bit, to analog (NTSC/PAL) composite video. The 1159 takes advantage of the latest technology to provide high-performance conversion from digital SDI to analog NTSC or PAL composite video. The digital input is non- looping and offers excellent return loss. Error-free transmission is provided for input cable lengths exceeding 500ft. Serial digital input is confirmed by a signal presence LED.

Two NTSC analog outputs are available on the rear panel for distribution purposes. In addition, there is a Y/C pair of BNC connectors for S-Video distribution.

FEATURES

‹Color Bar Select

‹CCIR 601 Compliant

‹Set-up On/Off

‹Select NTSC/PAL

‹Fault Indication

‹Passes Line 21

Three switches on the front panel select Color Bars, Set-up On/Off and NTSC/PAL. Line 21 is preserved for closed caption. The DigiFlex 1159 is designed to reside in LINK's 1000-Series frame. This frame can house up to 11 modules of various types. A redundant power supply is available for dual power supply operation. A second power cord is a part of the redundant power supply for separate AC circuit breakers.

The family of DigiFlex 1000 series modules will operate in the mounting frame in any configuration. The specific rear cell matches the module and in some cases the rear cell detects the desired output signal.

LINK ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668

Phone 573 334 4433 ‹ FAX 573 334 9255