200 SERIES
LINK ELECTRONICS, INC.
PRECISION AUDIO DA
MODEL PAA - 652
MADE IN THE USA
FEATURES
Low Noise
Differential Input
Gain Range ±16 dB
Eight Outputs, PFM-220
The PAA-652 mono audio distribution amplifier is another member of the 600 series products, and is designed to reflect the latest in the state of the art in engineering techniques. The PAA-652 is an extremely versatile audio amplifier, offering outstanding performance. The inputs and outputs use captive screw clamp terminals located on the matching rear cell assembly. The rear cell model PAA-600 is a separate item and should be purchased independently.
The PAA-652/1 provides eight high performance low impedance mono outputs. The input is over voltage protected for up to 120 volts AC or DC.
The PAA-652 is well suited for any type of operation. The input is balanced bridging, but can be terminated into 150 or 600 ohms. An unbalanced input is converted to balanced outputs. The transmission path of the PAA-652 is virtually transparent.
The features include 100dB of Signal-to-Noise ratio, .05 dB frequency response from 20 Hz to 20 KHz, and .03% total harmonic distortion from 20 Hz to 20 KHz. The isolation between modules is greater than 100 dB. A gain control on the front panel allows for gain adjustment of ±16dB. The PAA-652/1 operates in the PFM-220 frame holding up to four (4) modules.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433 FAX 573 334 9255
